Used with Coir Disk to install Marsh Mat Inlet Filters.

Eco-friendly coconut fiber sediment control solution for storm drainage inlets.

Box Includes:

• 10 Drain Debris Filters - 1 1/4" x 27" x 30"
• 10 Installation Kits - 8 Zip Ties & 8 Disk

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

Serves as an excellent sediment control solution at sewer inlets during the construction phase.

Roll Size: 1 1/4" x 27" x 55'

Zip Ties and Coir Disks sold separately.

Serves as an excellent sediment control solution at sewer inlets during the construction phase.

Kit includes one 1 1/4" x 27" x 30" Coir Mat, 8 Zip Ties & 8 Disk.

Serves as an excellent sediment control solution at sewer inlets during the construction phase.

Each kit includes one 1 1/4" x 27" x 30" Coir Mat, 8 Zip Ties & 8 Disk.

Box of 10

Used with 24" Zip Tie to install Marsh Mat Inlet Filters.

Easy to install roof drain filter keeps debris away from drain to allow water to drain.

Avoid clogged drains and expensive water damage by keeping leaves and large debris away from roof drains. Our economical, easy-to-install Roof Drain Filter holds drain-clogging litter, wind blown leaves and other debris away from the drain strainer but allows high water flow.

Roof Drain Filter installs in minutes, needs minimal upkeep and gives you the confidence that roof drains will keep flowing.

You'll appreciate the ease of installation using common hand tools, cable ties, roofing adhesive or wire. Easily maintain by sweeping top and sides to remove built up sediment and debris.

Features & Benefits

• Keeps drains free of leaves and debris
• Porous texture allows high flow rate
• Exposed overflow reduces ponding
• Available in a pad or roll
• Attaches to roof or strainer in minutes
• Easily maintain by sweeping top and sides to remove debris

Installation

1. Remove sediment and debris around drain.
2. Verify size allows at least 3” of filter from outer edge of strainer.
3. To ensure a snug fit, cut two slits on net side to make an X-shaped opening the size of the strainer.
4. Slide Filter over strainer, net side down.
5. Trim off excess material around strainer.

Maintenance

• Sweep top and sides of Roof Drain Filter to remove debris

• Remove debris from roof

• Check semi-annually and clean or replace

Box Includes:

• 1 Roof Drain Filter Pad - 1 1/2" x 21" x 21"

Easy to install roof drain filter keeps debris away from drain to allow water to drain.

Avoid clogged drains and expensive water damage by keeping leaves and large debris away from roof drains. Our economical, easy-to-install Roof Drain Filter holds drain-clogging litter, wind blown leaves and other debris away from the drain strainer but allows high water flow.

Roof Drain Filter installs in minutes, needs minimal upkeep and gives you the confidence that roof drains will keep flowing.

You'll appreciate the ease of installation using common hand tools, cable ties, roofing adhesive or wire. Easily maintain by sweeping top and sides to remove built up sediment and debris.

Features & Benefits

• Keeps drains free of leaves and debris
• Porous texture allows high flow rate
• Exposed overflow reduces ponding
• Available in a pad or roll
• Attaches to roof or strainer in minutes
• Easily maintain by sweeping top and sides to remove debris

Installation

1. Remove sediment and debris around drain.
2. Verify size allows at least 3” of filter from outer edge of strainer.
3. To ensure a snug fit, cut two slits on net side to make an X-shaped opening the size of the strainer.
4. Slide Filter over strainer, net side down.
5. Trim off excess material around strainer.

Maintenance

• Sweep top and sides of Roof Drain Filter to remove debris

• Remove debris from roof

• Check semi-annually and clean or replace

Box Includes:

• 12 Roof Drain Filter Pads - 1 1/2" x 21" x 21"

Easy to install roof drain filter keeps debris away from drain to allow water to drain.

Avoid clogged drains and expensive water damage by keeping leaves and large debris away from roof drains. Our economical, easy-to-install Roof Drain Filter holds drain-clogging litter, wind blown leaves and other debris away from the drain strainer but allows high water flow.

Roof Drain Filter installs in minutes, needs minimal upkeep and gives you the confidence that roof drains will keep flowing.

You'll appreciate the ease of installation using common hand tools, cable ties, roofing adhesive or wire. Easily maintain by sweeping top and sides to remove built up sediment and debris.

Features & Benefits

• Keeps drains free of leaves and debris
• Porous texture allows high flow rate
• Exposed overflow reduces ponding
• Available in a pad or roll
• Attaches to roof or strainer in minutes
• Easily maintain by sweeping top and sides to remove debris

Installation

1. Remove sediment and debris around drain.
2. Verify size allows at least 3” of filter from outer edge of strainer.
3. To ensure a snug fit, cut two slits on net side to make an X-shaped opening the size of the strainer.
4. Slide Filter over strainer, net side down.
5. Trim off excess material around strainer.

Maintenance

• Sweep top and sides of Roof Drain Filter to remove debris

• Remove debris from roof

• Check semi-annually and clean or replace

Box Includes:

• 3 Roof Drain Filter Pads - 1 1/2" x 21" x 21"

Easy to install roof drain filter keeps debris away from drain to allow water to drain.

Avoid clogged drains and expensive water damage by keeping leaves and large debris away from roof drains. Our economical, easy-to-install Roof Drain Filter holds drain-clogging litter, wind blown leaves and other debris away from the drain strainer but allows high water flow.

Roof Drain Filter installs in minutes, needs minimal upkeep and gives you the confidence that roof drains will keep flowing.

You'll appreciate the ease of installation using common hand tools, cable ties, roofing adhesive or wire. Easily maintain by sweeping top and sides to remove built up sediment and debris.

Features & Benefits

• Keeps drains free of leaves and debris
• Porous texture allows high flow rate
• Exposed overflow reduces ponding
• Available in a pad or roll
• Attaches to roof or strainer in minutes
• Easily maintain by sweeping top and sides to remove debris

Installation

1. Remove sediment and debris around drain.
2. Verify size allows at least 3” of filter from outer edge of strainer.
3. To ensure a snug fit, cut two slits on net side to make an X-shaped opening the size of the strainer.
4. Slide Filter over strainer, net side down.
5. Trim off excess material around strainer.

Maintenance

• Sweep top and sides of Roof Drain Filter to remove debris

• Remove debris from roof

• Check semi-annually and clean or replace

Box Includes:

• 6 Roof Drain Filter Pads - 1 1/2" x 21" x 21"

Easy to install roof drain filter keeps debris away from drain to allow water to drain.

Avoid clogged drains and expensive water damage by keeping leaves and large debris away from roof drains. Our economical, easy-to-install Roof Drain Filter holds drain-clogging litter, wind blown leaves and other debris away from the drain strainer but allows high water flow.

Roof Drain Filter installs in minutes, needs minimal upkeep and gives you the confidence that roof drains will keep flowing.

You'll appreciate the ease of installation using common hand tools, cable ties, roofing adhesive or wire. Easily maintain by sweeping top and sides to remove built up sediment and debris.

Features & Benefits

• Keeps drains free of leaves and debris
• Porous texture allows high flow rate
• Exposed overflow reduces ponding
• Available in a pad or roll
• Attaches to roof or strainer in minutes
• Easily maintain by sweeping top and sides to remove debris

Installation

1. Remove sediment and debris around drain.
2. Verify size allows at least 3” of filter from outer edge of strainer.
3. To ensure a snug fit, cut two slits on net side to make an X-shaped opening the size of the strainer.
4. Slide Filter over strainer, net side down.
5. Trim off excess material around strainer.

Maintenance

• Sweep top and sides of Roof Drain Filter to remove debris

• Remove debris from roof

• Check semi-annually and clean or replace

Box Includes:

• 1 Roof Drain Filter Roll - 1 1/2" x 21" x 21'

Eco-friendly coconut fiber sediment control solution for storm drainage inlets.

Box Includes:

• 1 Drain Debris Filter Roll - 1 1/4" x 27" x 21'
• 8 Installation Kits - 8 Zip Ties & 8 Disk