Glue, Primer & Lubricants

PURCHASE FROM OUR STORE

BLUE Lube - Gasket Pipe Lube - Gallon

BLUE Lube - Gasket Pipe Lube - Gallon

BLUE Lube - Gasket Pipe Lube - Quart

BLUE Lube - Gasket Pipe Lube - Quart

Glues, Primers, & Lubricants

Glues, Primers, & Lubricants

  • SKU:
  • Brand:

  • Product Description:

    Glues, Primers, & Lubricants are unavailable for purchase online. For additional product info, please see the Technical Library or contact us at (317) 346-4110.


IPS #3020 3

IPS #3020 3" Roller for MT-651 Qt. Can w/ 1 3/4" Neck

  • SKU: 10007
  • Brand:

  • Product Description:

    Roll-A-Weld 3" roller for pipe diameters from 3" through 6"; fits MT-653 empty quart triple tight neck.


IPS #5020 4

IPS #5020 4" Swab for MT-651 Qt. Can w/ 1 3/4" Neck

  • SKU: 12071
  • Brand:

  • Product Description:

    4" swab for pipe diameters from 3" through 8"; fits standard quart can as well as MT-651 empty quart can.


IPS #6020 4

IPS #6020 4" Roller for MT-651 Qt. Can

  • SKU: 11957
  • Brand:

  • Product Description:

    Roll-A-Weld 4" roller for pipe diameters from 3" through 8"; fits standard quart can as well as MT-651 empty quart can.


IPS #7020 7

IPS #7020 7" Roller for MT-648 Gallon Can

  • SKU: 10008
  • Brand:

  • Product Description:

    Jumbo Roll-A-Weld 7" roller for pipe diameters of 6" or larger; fits MT-648 empty gallon can and cements available in wide mouth cans.


IPS 1/2 Pt. Pipe Joint Compound w/Teflon w/Brush (White Seal)

IPS 1/2 Pt. Pipe Joint Compound w/Teflon w/Brush (White Seal)

  • SKU: 87730
  • Brand:

  • Product Description:

    Weld On White Seal Plus Pipe Thread Sealant is a multi-purpose heavy duty sealant with PTFE and zero VOC content for industrial applications and pipe lines.

    APPLICATION: White Seal Plus can be used for sealing and lubricating metal and plastic piping systems carrying: air and gases (compressed, manufactured or natural), ammonia, brine, acid (diluted), caustic alkalis (diluted), corrosives, freons, fuel (diesel, gasoline, jet fuel, and kerosene), oils, petroleum, propane, solvents, steam, sugar, and water. Not recommended for oxygen, fluorine or liquid sodium systems. Contains finely homogenized TeflonΠPTFE particles to fully pack voids and thread imperfection ensuring pressure-tight, leak-proof seal on pipe threads.

    • Contains finely homogenized PTFE particles for filling cracks and thread imperfections _ ensuring a leak-proof seal.
    • Non-setting formula allows easy disassembly of joints without damage to pipe, fittings or threads. Protects threaded areas from rust and corrosion and prevents galling.
    • For sealing and lubricating all metal and plastic (ABS, PVC, CPVC, Polypropylene, & Nylon) piping systems carrying various materials.1 Tested and approved for addition to the FBC System compatible program for use with FlowGuard GoldŒ, BlazeMasterŒ, and CorzanŒ CPVC plastic piping systems.
    • No VOC content.
    • Compliant with LEED ——Œ (Leadership in Energy and Environmental Design). When using this WELD-ON low VOC product, credit can be claimed for LEED Green Building Rating System _ Indoor Environmental Quality.
    • Listed by NSF International for compliance with ASTM D 2564, NSF/ANSI Standard 14, and NSF/ANSI Standard 61 for use on potable water, drain, waste, vent and sewer applications.
    • Listed by IAPMO for compliance with IAPMO PS 36-90 and applicable sections of the latest edition of the Uniform Plumbing CodeŒ International Plumbing CodeŒ.

    DIRECTIONS FOR USE:

    • Store between 20F and 140F (-6C and 60C). Sealant can be used as low as _50F (-45C).
    • Stir before use.
    • Ensure threads are clean (free of dirt, oil moisture, etc.) and made with good die.
    • Apply sealant freely to male threads only
    • Assemble joints. Do not over torque. System may be put in service immediately.

IPS 2 oz. Tube Pipe Joint Compound w/Teflon (White Seal)

IPS 2 oz. Tube Pipe Joint Compound w/Teflon (White Seal)

  • SKU: 80200
  • Brand:

  • Product Description:

    Weld On White Seal Plus Pipe Thread Sealant is a multi-purpose heavy duty sealant with PTFE and zero VOC content for industrial applications and pipe lines.

    APPLICATION: White Seal Plus can be used for sealing and lubricating metal and plastic piping systems carrying: air and gases (compressed, manufactured or natural), ammonia, brine, acid (diluted), caustic alkalis (diluted), corrosives, freons, fuel (diesel, gasoline, jet fuel, and kerosene), oils, petroleum, propane, solvents, steam, sugar, and water. Not recommended for oxygen, fluorine or liquid sodium systems. Contains finely homogenized TeflonΠPTFE particles to fully pack voids and thread imperfection ensuring pressure-tight, leak-proof seal on pipe threads.

    • Contains finely homogenized PTFE particles for filling cracks and thread imperfections _ ensuring a leak-proof seal.
    • Non-setting formula allows easy disassembly of joints without damage to pipe, fittings or threads. Protects threaded areas from rust and corrosion and prevents galling.
    • For sealing and lubricating all metal and plastic (ABS, PVC, CPVC, Polypropylene, & Nylon) piping systems carrying various materials.1 Tested and approved for addition to the FBC System compatible program for use with FlowGuard GoldŒ, BlazeMasterŒ, and CorzanŒ CPVC plastic piping systems.
    • No VOC content.
    • Compliant with LEED ——Œ (Leadership in Energy and Environmental Design). When using this WELD-ON low VOC product, credit can be claimed for LEED Green Building Rating System _ Indoor Environmental Quality.
    • Listed by NSF International for compliance with ASTM D 2564, NSF/ANSI Standard 14, and NSF/ANSI Standard 61 for use on potable water, drain, waste, vent and sewer applications.
    • Listed by IAPMO for compliance with IAPMO PS 36-90 and applicable sections of the latest edition of the Uniform Plumbing CodeŒ International Plumbing CodeŒ.

    DIRECTIONS FOR USE:

    • Store between 20F and 140F (-6C and 60C). Sealant can be used as low as _50F (-45C).
    • Stir before use.
    • Ensure threads are clean (free of dirt, oil moisture, etc.) and made with good die.
    • Apply sealant freely to male threads only
    • Assemble joints. Do not over torque. System may be put in service immediately.

IPS 727 Pt. Hot 'R Cold PVC Cement - Medium Body (Clear)

IPS 727 Pt. Hot 'R Cold PVC Cement - Medium Body (Clear)

  • SKU: 10842
  • Brand:

  • Product Description:

    Weld-OnŒ 727Ž Hot ´R ColdŽ is a clear, low VOC emission, medium bodied, very fast setting, high strength PVC solvent cement for all classes and schedules of pipe and fittings with interference fit through 6 inch (160 mm) diameter, Schedule 80 through 4 inch (110 mm) diameter. Can be used without primer on non-pressure systems if local codes permit.

    APPLICATION: Weld-On 727 Hot ´R Cold is specially formulated for use in a wide range of temperatures encountered during all seasons of the year. Successful, high strength joints can be made at temperatures as low as -15F (-26C) and as high as 110F (43C). It is suitable for use on rigid and flexible PVC pipe and fittings and can be used in very wet condition and/or where quick pressurization of the piping systems is desired.

    Detailed directions on making solvent cemented joints are printed on the container label. An installation DVD/CD covering solvent cementing is available. It not only describes the basic principles of solvent cementing, but also covers the handling, storage and use of our products. It is highly recommended that the installer review the instructions supplied by the pipe and fitting manufacturer.

    NOTE: WELD-ON solvent cements must never be used in a PVC system using or being tested by compressed air or gases; including air-over-water booster.

    • Medium-bodied, very fast-setting, low-VOC PVC cement for all classes and schedules with interference fit through 6" (160 mm) diameter, Schedule 80 through 4" (110 mm) diameter
    • Premium formula for all weather conditions (-15F to 110F, -26C to 43C)
    • Can be used without primer on non-pressure systems if local code
    • Excellent for industrial, irrigation, electrical conduit, pool & spa and plumbing, including PVC foam core pipe
    • Can be used without primer on non-pressure systems if local codes permit
    • Meets ASTM D 2564 Standard
    • Meets SCAQMD Rule 1168/316A
    • Compliant with LEEDŒ (Leadership in Energy and Environmental Design). When using this Weld-On low VOC product, credit can be claimed for LEED Green Building Rating System - Indoor Environmental Quality.
    • Listed by NSF International for compliance with ASTM D 2564, NSF/ANSI Standard 14, and NSF/ANSI Standard 61 for use on potable water, drain, waste, vent and sewer applications.
    • Listed by IAPMO for compliance with ASTM D 2564 and applicable sections of the latest edition of the Uniform Plumbing CodeŒ.

IPS 727 Qt. Hot 'R Cold PVC Cement - Medium Body (Clear)

IPS 727 Qt. Hot 'R Cold PVC Cement - Medium Body (Clear)

  • SKU: 10841
  • Brand:

  • Product Description:

    Weld-OnŒ 727Ž Hot ´R ColdŽ is a clear, low VOC emission, medium bodied, very fast setting, high strength PVC solvent cement for all classes and schedules of pipe and fittings with interference fit through 6 inch (160 mm) diameter, Schedule 80 through 4 inch (110 mm) diameter. Can be used without primer on non-pressure systems if local codes permit.

    APPLICATION: Weld-On 727 Hot ´R Cold is specially formulated for use in a wide range of temperatures encountered during all seasons of the year. Successful, high strength joints can be made at temperatures as low as -15F (-26C) and as high as 110F (43C). It is suitable for use on rigid and flexible PVC pipe and fittings and can be used in very wet condition and/or where quick pressurization of the piping systems is desired.

    Detailed directions on making solvent cemented joints are printed on the container label. An installation DVD/CD covering solvent cementing is available. It not only describes the basic principles of solvent cementing, but also covers the handling, storage and use of our products. It is highly recommended that the installer review the instructions supplied by the pipe and fitting manufacturer.

    NOTE: WELD-ON solvent cements must never be used in a PVC system using or being tested by compressed air or gases; including air-over-water booster.

    • Medium-bodied, very fast-setting, low-VOC PVC cement for all classes and schedules with interference fit through 6" (160 mm) diameter, Schedule 80 through 4" (110 mm) diameter
    • Premium formula for all weather conditions (-15F to 110F, -26C to 43C)
    • Can be used without primer on non-pressure systems if local code
    • Excellent for industrial, irrigation, electrical conduit, pool & spa and plumbing, including PVC foam core pipe
    • Can be used without primer on non-pressure systems if local codes permit
    • Meets ASTM D 2564 Standard
    • Meets SCAQMD Rule 1168/316A
    • Compliant with LEEDŒ (Leadership in Energy and Environmental Design). When using this Weld-On low VOC product, credit can be claimed for LEED Green Building Rating System - Indoor Environmental Quality.
    • Listed by NSF International for compliance with ASTM D 2564, NSF/ANSI Standard 14, and NSF/ANSI Standard 61 for use on potable water, drain, waste, vent and sewer applications.
    • Listed by IAPMO for compliance with ASTM D 2564 and applicable sections of the latest edition of the Uniform Plumbing CodeŒ.

IPS 735 Pt. PVC Wet N Fast Blue Cement

IPS 735 Pt. PVC Wet N Fast Blue Cement

  • SKU: 12496
  • Brand:

  • Product Description:

    WELD-ONŒ 735Ž Wet ´N FastŽ is a blue, low VOC emission, medium bodied, extremely fast setting, high strength PVC solvent cement for all classes and schedules of pipe and fittings with interference fit through 6 inch (160 mm) diameter, Schedule 80 through 4 inch (110 mm) diameter.

    APPLICATION: WELD-ON 735 Wet ´N Fast is for use on rigid and flexible PVC pipe and fittings, including PVC foam core DWV. It is specially formulated for applications where conditions are wet and/or quick pressurization of the piping systems is desired. It was developed to answer specific needs in the plumbing industry but may also be used in irrigation, pool, spa and other applications. Can be used without primer on non-pressure systems if local codes permit.

    Detailed directions on making solvent cemented joints are printed on the container label. An installation DVD/CD covering solvent cementing is available. It not only describes the basic principles of solvent cementing, but also covers the handling, storage and use of our products. It is highly recommended that the installer review the instructions supplied by the pipe and fitting manufacturer.

    NOTE: WELD-ON solvent cements must never be used in a PVC system using or being tested by compressed air or gases; including air-over-water booster.

    • Medium-bodied, very fast-setting, low-VOC PVC cement for all classes and schedules with interference fit through 6" (160 mm) diameter, Schedule 80 through 4" (110 mm) diameter
    • Premium formula for all weather conditions (-15F to 110F, -26C to 43C)
    • Can be used without primer on non-pressure systems if local code
    • Plumbing quality cement for wet conditions and/or quick pressurization
    • Can be used without primer on non-pressure systems if local codes permit
    • Meets ASTM D 2564 Standard
    • Meets SCAQMD Rule 1168/316A
    • Compliant with LEEDŒ (Leadership in Energy and Environmental Design). When using this Weld-On low VOC product, credit can be claimed for LEED Green Building Rating System - Indoor Environmental Quality.
    • Listed by NSF International for compliance with ASTM D 2564, NSF/ANSI Standard 14, and NSF/ANSI Standard 61 for use on potable water, drain, waste, vent and sewer applications.
    • Listed by IAPMO for compliance with ASTM D 2564 and applicable sections of the latest edition of the Uniform Plumbing CodeŒ.