Triplewall pipe is a three layer high density polyethylene sewer & drain pipe. Consisting of a white exterior and black interior.

• Conforms to ASTM F810 specifications
• Joining System: Welded Bell
• Length: 10'
• Perforations: 1/2" Hole, 4 Rows at 4 & 8 o'clock positions

Triplewall pipe is a three layer high density polyethylene sewer & drain pipe. Consisting of a white exterior and black interior.

• Conforms to ASTM F810 specifications
• Joining System: Welded Bell
• Length: 10'
• Perforations: 5/8" Hole, 3 Rows at 4, 8 & 12 o'clock positions

Triplewall pipe is a three layer high density polyethylene sewer & drain pipe. Consisting of a white exterior and black interior.

• Conforms to ASTM F810 specifications
• Joining System: Welded Bell
• Length: 10'

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

Used to seal Infiltrator risers and lids.

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

ATL by Infiltrator is a passive advanced treatment leachfield system designed as an environmentally friendly alternative to traditional stone and pipe drainfields. The ATL system is a sand-lined treatment and dispersal leachfield system consisting of 6 components.

How It Works

Upon entering the system, septic tank effluent progresses through each component listed below.

1. 4" diameter pipe
2. Large-diameter synthetic aggregate
3. Fine geotextile
4. Small-diameter synthetic aggregate
5. Coarse geotextile
6. 6" thick system sand

Benefits:

• Produces Class 1 (EPA Secondary) Treated Effluent
• A Passive Advanced Treatment Leachfield _ No Moving Parts or Power Required
• Modules are Quick and Easy to Install
• Shallow System Maximizes Site Suitability and Reduces Amount of Sand Fill Requirements
• No venting and sand cover requirements

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

ATL by Infiltrator is a passive advanced treatment leachfield system designed as an environmentally friendly alternative to traditional stone and pipe drainfields. The ATL system is a sand-lined treatment and dispersal leachfield system consisting of 6 components.

How It Works

Upon entering the system, septic tank effluent progresses through each component listed below.

1. 4" diameter pipe
2. Large-diameter synthetic aggregate
3. Fine geotextile
4. Small-diameter synthetic aggregate
5. Coarse geotextile
6. 6" thick system sand

Benefits:

• Produces Class 1 (EPA Secondary) Treated Effluent
• A Passive Advanced Treatment Leachfield _ No Moving Parts or Power Required
• Modules are Quick and Easy to Install
• Shallow System Maximizes Site Suitability and Reduces Amount of Sand Fill Requirements
• No venting and sand cover requirements

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

This end cap features pipe cutouts on the right and left column designed to accommodate inspection ports, clean outs, or inlet pipes on either side of the end cap. These pipe locations allow easy access for maintenance and alignment when running pressure pipe through the chamber. The Quick4 Plus™ All-in-One 8 Endcap may be used at either end of a chamber row or can be installed mid-trench for an inspection port, cleanout or inlet/outlet pipe. The mid-trench connection feature allows construction of chamber rows with center feed inletting for easy installation of serial distribution systems. Pipe connection options allow for side, end or top inletting.

Benefits:

• May be used at the end of chamber row for an inlet/outlet or can be installed mid-trench
• Mid-trench connection feature allows center feed inletting of chamber rows
• Center-feed connection allows for easy installation of serial distribution systems
• Variable pipe connection options allow for side, end or top inletting
• Piping drill points are set for gravity or pressure pipe

Specifications:

Size
18"W x 15"L x 8"H
(46 cm x 38 cm x 20 cm)

Installed Length
10.4" (26 cm)

Invert Height
3.3" (8 cm), 9" (23 cm)

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

The Quick4 Plus™ Standard Low Profile (LP) offers maximum strength through its four center structural columns. This chamber can be installed in a 36" wide trench. It is shorter in height than Infiltrator’s other Standard model chambers, allowing for shallow installation. Like the original line of Quick4® chambers, it offers advanced contouring capability with its Contour Swivel Connection™, which permits turns up to 10°, right or left.

Benefits:

• Low profile design makes this chamber ideal for shallow applications
• Reduces imported fill needed for cap and fill systems
• Four center structural columns offer superior strength
• Advanced contouring connections
• Latching mechanism allows for quick installation
• Four-foot chamber lengths are easy to handle and install
• Supports wheel loads of 16,000 lbs/axle with 12" of cover

Specifications:

Size
34"W x 53"L x 8"H
(864 mm x 1346 mm x 203 mm)

Effective Length
48" (1219 mm)

Louver Height
6.3" (160 mm)

Storage Capacity
32 gal (121 L)

Invert Height
3.3" (84 mm), 9.6" (244 mm)

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

For use with the Quick4 Plus™ Low Profile chambers, the Quick4 Plus endcap offers a simple, flat design and allows installation of a pipe from the end of the chamber rows. Piping drill points are set for gravity or pressure points.

Benefits:

• Simple, flat design
• Allows installation of a pipe from the end only
• Piping drill points are set for gravity or pressure pipe

Specifications:

Size
18"W x 7"L x 8"H
(457 mm x 177 mm x 203 mm)

Additional Length per Trench
4.5" (114 mm)

Invert Height
3.3" (84 mm)

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

The Quick4 Plus™ All-In-One 12 Endcap may be used at either end of the chamber row for an inlet/outlet or can be installed mid-trench. The mid-trench connection feature allows construction of chamber rows with a center-feed, as an alternative to inletting at the ends of chamber rows. Center-feed connections allow for easy installation of serial distribution systems. Pipe connection options include sides, ends or top.

Benefits:

• May be used at the end of chamber row for an inlet/outlet or can be installed mid-trench
• Mid-trench connection feature allows construction of chamber rows with center feed, as an alternative to inletting at the ends of chamber rows
• Center-feed connection allows for easy installation of serial distribution systems
• Pipe connection options include sides, ends or top

Specifications:

Size
33"W x 20.5"L x 13"H
(838 mm x 520 mm x 330 mm)

Additional Length per Trench
18.2" (462 mm)

Invert Height
5.3" (134 mm), 8" (203 mm)

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

The Quick4 Plus™ Standard chamber offers maximum strength through its two center structural columns. This chamber can be installed in a 36" wide trench. Like the original line of Quick4® chambers, it offers advanced contouring capability with its Contour Swivel Connection™ which permits turns up to 10°, right or left. It is also available in 4' lengths to provide optimal installation flexibility.

Benefits:

• Two center structural columns offer increased stability and superior strength
• Advanced contouring connections
• Latching mechanism allows for quick installation
• Four-foot chamber lengths are easy to handle and install
• Supports wheel loads of 16,000 lbs/axle with 12" of cover

Specifications:

Size
34"W x 53"L x 12"H
(864 mm x 1346 mm x 305 mm)

Effective Length
48" (1219 mm)

Louver Height
8" (203 mm)

Storage Capacity
47 gal (178 L)

Invert Height
0.6" (15 mm), 5.3" (135 mm),
8.0" (203 mm), 12.7" (323 mm)

Used to join two sections of Presby Advanced Septic Pipe.