Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

Submersible sewage/*effluent or dewatering pump

• Waste-Mate 260 Series
• Durable, cast iron construction - switch case and pump housing
• Available in automatic or nonautomatic operation
• The sizing of effluent systems normally requires variable level float(s) controls and properly sized basins to achieve required pumping cycles or dosing timers with non automatic pumps.

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

Submersible pump for dewatering (sump) or effluent (septic tank systems).

• Mighty-Mate 50 Series
• Cast iron switch case, motor and pump housing
• Engineered thermoplastic base
• Available in automatic or nonautomatic operation
• The sizing of effluent systems normally requires variable level float(s) controls and properly sized basins to achieve required pumping cycles or dosing timers with non automatic pumps.

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

Submersible sewage/*effluent or dewatering pump

• Waste-Mate 260 Series
• Durable, cast iron construction - switch case and pump housing
• Available in automatic or nonautomatic operation
• The sizing of effluent systems normally requires variable level float(s) controls and properly sized basins to achieve required pumping cycles or dosing timers with non automatic pumps.

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

Submersible pump for dewatering (sump) or effluent (septic tank systems).

• Mighty-Mate 50 Series
• Cast iron switch case, motor and pump housing
• Engineered thermoplastic base
• Available in automatic or nonautomatic operation
• The sizing of effluent systems normally requires variable level float(s) controls and properly sized basins to achieve required pumping cycles or dosing timers with non automatic pumps.

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

The AquaNot® Fit 508 is our premium backup pump system that can be paired with a primary sump pump. It comes equipped with a high-performance, high efficiency, double-sealed 12 V battery-powered sump pump designed to provide backup support to the primary sump pump.  The AquaNot 508 turns on during high flow events or takes over in the event of a power outage. The system is self-monitoring and provides alerts for occurrences such as a power outage, high water condition or switch obstruction.

In addition, the AquaNot Fit 508 sump pump backup power system includes a Z Control enabled, Wi-Fi connected, smart, innovative controller with 2-way communication. The system allows the homeowner or designated service provider to remotely monitor, diagnose, or troubleshoot the system from a computer or handheld device. Away on vacation and want to be sure your system is working properly, no problem. With the AquaNot Fit 508 and built-in Z Control capabilities, you can do just that.

This Zoeller backup sump pump is capable of providing up to 6 hours of continuous pump run time.  This equates to about 2 days of backup in the event of a power outage.  The charger has an option to add a second pump run float for added redundancy at a reasonable price.

With the AquaNot Fit 508 battery backup sump pump, you can be 100% certain and confident about your flood prevention with real time peace of mind from anywhere. As with every Zoeller battery backup pump, it is 100% Factory Tested.

• A self-testing 12 V DC backup sump pump for basement sump applications
• Provides backup support to a primary sump pump when the primary pump is unable to keep up with the water flow or during a power outage
• Able to provide push notification alerts for a whole host of occurrences that can be selected based on your personal preferences
• Z Control monitoring and testing capability can be shared with a local Contractor who can monitor alarms and respond to alerts on behalf of the Homeowner
• A smart, intelligent, and innovative controller monitors pump activation, high water alarm conditions, air locked pump events, power outages and system faults
• 24/7 backup support for your primary sump pump
• Engineered, glass-filled thermoplastic vortex impellers
• Lockable battery box, Battery sold separate
• 100% Factory Tested primary sump pump and battery backup sump pump
• 3-year limited warranty: this model comes with warranty coverage from Zoeller Pump Company, giving you extra protection and more peace of mind

• Charger: Battery replacement reminder, Keeps battery charged, Performs self-testing, Z Control Enabled

• Alerts: Connection fault, High water, Power outage/restored, Pump activation, Pump cycled, Pump fault, Switch fault
• Battery Case: Fits all group size 27, 29 and 31 batteries, Made from non-corrodible polyethylene, Maximum battery dimensions of 13" (330 mm) L x 7-1/2" (191 mm) W x 9-1/2" (241 mm) H, To use multiple batteries, order extra battery case with hookup wire (P/N 10-5184).

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

The AquaNot® Fit 508 ProPak with Model M53 primary pump is a complete system for basement sump applications.  This system is designed to provide premium protection in basement sump applications at a mid-level price.

The AquaNot Fit 508 ProPak includes two pumps, battery box, controller, check valve, and pipe.  The primary pump is the 3/10 HP automatic Model M53 which comes standard with the Zoeller LED Plug that allows you to check for power at a quick glance. The backup pump is the Model 508.  In a high-water flow event, the 12 Volt battery-powered Model 508 is designed to provide backup support to the Model 53.

In the event of a power outage, the Model 508 will take over.  The system is self-monitoring and provides alert conditions for occurrences such as a power outage, high water condition, a switch obstruction and more.

The AquaNot Fit 508 can provide six hours of continuous pump run time.  This equates to two days of backup sump pump protection for most homes.  For added redundancy, this system is equipped with connections for a second pump run float.

With the AquaNot Fit 508, you can be 100% confident in your flood prevention protection.  For added peace of mind, the AquaNot Fit 508 ProPak is 100% Factory Tested.

• Includes the 3/10 HP Model M53 primary pump which comes standard with the Zoeller LED Plug that allows you to check for power at a quick glance
• A self-testing 12 V DC backup sump pump for basement sump applications
• Provides backup support to a primary sump pump when the primary pump is unable to keep up with the water flow or during a power outage
• Able to provide push notification alerts for a whole host of occurrences that can be selected based on your personal preferences
• Z Control monitoring and testing capability can be shared with a local Contractor who can monitor alarms and respond to alerts on behalf of the Homeowner
• A smart, intelligent, and innovative controller monitors pump activation, high water alarm conditions, air locked pump events, power outages and system faults
• 24/7 backup support for your primary sump pump
• A preassembled system of 2 pumps, floats, and a controller designed to work together in a reliable and efficient manner
• Engineered, glass-filled thermoplastic vortex impellers
• Lockable battery box, Battery sold separate
• 100% Factory Tested primary sump pump and battery backup sump pump
• 3-year limited warranty: this model comes with warranty coverage from Zoeller Pump Company, giving you extra protection and more peace of mind
•  
• Primary Pump: Primary Pump M53 – 115 V, 3/10 HP with LED Plug

• Charger: Battery replacement reminder, Keeps battery charged, Performs self-testing, Z Control Enabled

• Alerts: Connection fault, High water, Power outage/restored, Pump activation, Pump cycled, Pump fault, Switch fault
• Battery Case: Fits all group size 27, 29 and 31 batteries, Made from non-corrodible polyethylene, Maximum battery dimensions of 13" (330 mm) L x 7-1/2" (191 mm) W x 9-1/2" (241 mm) H, To use multiple batteries, order extra battery case with hookup wire (P/N 10-5184).

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

The Shark Series® Model BN803 Grinder Pump is designed to remove raw sewage in sewage ejector applications. The professional-grade, 1/2 HP 803 is a time-tested and reliable grinder pump.  The BN803 is a nonautomatic pump equipped with a single piggyback float switch.  The piggyback float switch allows you to set the on and off point of the pump in the field. This is ideal in an application with a deep sump pit or pump tank.

The industry proven “scissor like” Tri-Slice® cutter technology includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1/8″.  The vortex impeller passes the slurry through the pump housing. This combination of features lessens the chance of clogging and downtime.

The Model 803’s motor housing, pump housing, and base are each constructed of cast iron.   The pump’s identification tag, handle, and hardware are made of non-corrodible stainless steel. This attention to detail ensures that the Model 803 is able to withstand the most demanding sewage ejector applications.

Every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right out of the box.

• Oil-filled motor and cast iron motor housing for optimal heat dissipation which prevents the pump from overheating
• Nonautomatic pump (Piggyback variable level float switch available separately)
• Proven Tri-Slice® cutter technology: Three independent cutting channels provide over 250,000 cuts per minute
• Piggyback float switch eliminates the possibility of water infiltration allowing the float to remain buoyant and functional at all times
• Powder-coated epoxy finish provides corrosion-resistance and extends the life of the pump in harsh environments
• Stainless steel screws, switch arm, guard, handle and hardware to prevent rust and corrosion over the life of the pump
• 100% Factory Tested - every pump is submerged in water and tested at the factory to ensure that it performs as expected when you receive it
• Comes with a 3-year limited warranty giving you protection over your investment and the peace of mind you expect in a quality product
• Horsepower: 1/2 HP
• Voltage: 115 V
• Amps: 7.0
• RPM: 3400
• Discharge: 1-1/4" NPT
• Solids Handling: Slurry
• On/Off Points: Variable level float switch, customer sets
• Impeller Type: Vortex
• Impeller Material: Engineered Plastic
• Cord Length: 15’ (5 m)

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

The Shark Series® Model BN807 Grinder Pump is designed to remove raw sewage in sewage ejector applications. The professional-grade, 1 HP 807 is a time-tested and reliable grinder pump.  The BN807 is a nonautomatic pump equipped with a single piggyback float switch.  The piggyback float switch allows you to set the on and off point of the pump in the field. This is ideal in an application with a deep sump pit or pump tank.

The industry proven “scissor like” Tri-Slice® cutter technology includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1/8″.  The vortex impeller passes the slurry through the pump housing. This combination of features lessens the chance of clogging and downtime.

The Model 807’s motor housing, pump housing, and base are each constructed of cast iron.   The pump’s identification tag, handle, and hardware are made of non-corrodible stainless steel. This attention to detail ensures that the Model 807 is able to withstand the most demanding sewage ejector applications.

Every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right out of the box.

• Oil-filled motor and cast iron motor housing for optimal heat dissipation which prevents the pump from overheating
• Nonautomatic pump (Piggyback variable level float switch available separately)
• Proven Tri-Slice® cutter technology: Three independent cutting channels provide over 250,000 cuts per minute
• Stainless steel float guard that prevents material or debris from collecting on the float ensuring proper operation every time
• Piggyback float switch eliminates the possibility of water infiltration allowing the float to remain buoyant and functional at all times
• Powder-coated epoxy finish provides corrosion-resistance and extends the life of the pump in harsh environments
• Stainless steel screws, switch arm, guard, handle and hardware to prevent rust and corrosion over the life of the pump
• 100% Factory Tested - every pump is submerged in water and tested at the factory to ensure that it performs as expected when you receive it
• Comes with a 3-year limited warranty giving you protection over your investment and the peace of mind you expect in a quality product
• Horsepower: 1 HP
• Voltage: 115 V
• Phase: 1 Ph
• Amps: 11.0
• Hertz: 60
• RPM: 3400
• Discharge: 1-1/4" NPT
• Solids Handling: Slurry
• On/Off Points: Variable level float switch, customer sets
• Impeller Type: Vortex
• Impeller Material: Engineered Plastic
• Cord Length: 15’ (5 m)

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

Our 160 Series pumps are robust, high-performance solutions suitable for various commercial applications, including septic tanks, low-pressure pipes (LPP), or enhanced flow STEP systems.

These heavy-duty sump and effluent pumps are constructed from durable cast iron with a corrosion-resistant, powder-coated epoxy finish. Together with their no-clog vortex impeller, these elements give you a commercial sump pump you can count on for smooth, reliable operation.

Whether you choose an automatic or nonautomatic configuration, you can expect these pumps to maintain 3,450 rpm and pump out 100 gallons per minute. Each device we offer undergoes rigorous computerized testing and comes with a one-year limited warranty to give you peace of mind.

Other features include:

• A max temperature of 130 degrees Fahrenheit.
• The ability to pass ¾-inch spherical solids.
• Hermetic seals.

• High Head Flow-Mate 160 Series
• Durable, cast iron constructed switch case, base, motor and pump housing
• Available in automatic or nonautomatic operation
• The sizing of effluent systems normally requires variable level float(s) controls and properly sized basins to achieve required pumping cycles or dosing timers with non automatic pumps.

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

Submersible pump for dewatering (sump) or effluent (septic tank systems).

• Mighty-Mate 50 Series
• All cast iron construction
• Available in automatic or nonautomatic operation
• The sizing of effluent systems normally requires variable level float(s) controls and properly sized basins to achieve required pumping cycles or dosing timers with non automatic pumps.

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

The Shark Series® Model M803 Grinder Pump with a is designed to remove raw sewage in sewage ejector applications. The professional-grade, 1/2 HP 803 is a time-tested and reliable grinder pump.  The M803 is a fully automatic float-operated sewage pump.  The white polypropylene float is solid so it cannot become waterlogged.  This ensures that it is always buoyant and able to turn the pump on when necessary.

The industry proven “scissor like” Tri-Slice® cutter technology includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1/8″.  The vortex impeller passed the slurry through the pump housing. This combination of features lessens the chance of clogging and downtime.

The Model 803’s switch case, motor housing, pump housing, and base are each constructed of cast iron.   The pump’s identification tag, float guard, handle, switch arm, and hardware are made of non-corrodible stainless steel. This attention to detail ensures that the Model 803 is able to withstand the most demanding sewage ejector applications.

Every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right out of the box.

• Oil-filled motor and cast iron motor housing for optimal heat dissipation which prevents the pump from overheating
• Automatic pump with a time-tested, reliable, preset, built-in snap action switch that makes for easy installation
• Proven Tri-Slice® cutter technology: Three independent cutting channels provide over 250,000 cuts per minute
• Stainless steel float guard that prevents material or debris from collecting on the float ensuring proper operation every time
• Solid, buoyant, polypropylene float to eliminate the possibility of water infiltration allowing the float to remain buoyant and functional at all times
• Powder-coated epoxy finish provides corrosion-resistance and extends the life of the pump in harsh environments
• Stainless steel screws, switch arm, guard, handle and hardware to prevent rust and corrosion over the life of the pump
• 100% Factory Tested - every pump is submerged in water and tested at the factory to ensure that it performs as expected when you receive it
• Comes with a 3-year limited warranty giving you protection over your investment and the peace of mind you expect in a quality product
• Horsepower: 1/2 HP
• Voltage: 115 V
• Amps: 7.0
• RPM: 3400
• Discharge: 1-1/4" NPT
• Solids Handling: Slurry
• On/Off Points: 13" (33 cm) / 5-3/4" (14.6 cm)
• Impeller Type: Vortex
• Impeller Material: Engineered Plastic
• Cord Length: 15’ (5 m)

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

The Shark Series® Model M805 Grinder Pump with a is designed to remove raw sewage in sewage ejector applications. The professional-grade, 3/4 HP 805 is a time-tested and reliable grinder pump.  The M805 is a fully automatic float-operated sewage pump.  The white polypropylene float is solid so it cannot become waterlogged.  This ensures that it is always buoyant and able to turn the pump on when necessary.

The industry proven “scissor like” Tri-Slice® cutter technology includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1/8″.  The vortex impeller passed the slurry through the pump housing. This combination of features lessens the chance of clogging and downtime.

The Model 805’s switch case, motor housing, pump housing, and base are each constructed of cast iron.   The pump’s identification tag, float guard, handle, switch arm, and hardware are made of non-corrodible stainless steel. This attention to detail ensures that the Model 805 is able to withstand the most demanding sewage ejector applications.

Every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right out of the box.

• Oil-filled motor and cast iron motor housing for optimal heat dissipation which prevents the pump from overheating
• Automatic pump with a time-tested, reliable, preset, built-in snap action switch that makes for easy installation
• Proven Tri-Slice® cutter technology: Three independent cutting channels provide over 250,000 cuts per minute
• Stainless steel float guard that prevents material or debris from collecting on the float ensuring proper operation every time
• Solid, buoyant, polypropylene float to eliminate the possibility of water infiltration allowing the float to remain buoyant and functional at all times
• Powder-coated epoxy finish provides corrosion-resistance and extends the life of the pump in harsh environments
• Stainless steel screws, switch arm, guard, handle and hardware to prevent rust and corrosion over the life of the pump
• 100% Factory Tested - every pump is submerged in water and tested at the factory to ensure that it performs as expected when you receive it
• Comes with a 3-year limited warranty giving you protection over your investment and the peace of mind you expect in a quality product
• Horsepower: 3/4 HP
• Voltage: 115 V
• Amps: 9.0
• RPM: 3400
• Discharge: 1-1/4" NPT
• Solids Handling: Slurry
• On/Off Points: 13" (33 cm) / 5-3/4" (14.6 cm)
• Impeller Type: Vortex
• Impeller Material: Engineered Plastic
• Cord Length: 15’ (5 m)