Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

Suitable for use as a pump tank, septic tank or rainwater tank in shallow, multiple, and serial tank configurations.

The Infiltrator CM-1060 is a lightweight, strong and durable septic tank. This watertight tank design is offered with Infiltrator’s line of custom-fit risers and heavy-duty lids. Infiltrator compression molded tanks provide a revolutionary improvement in thermoplastic septic tank design, offering exceptional long-term strength and watertightness.

Do not install the tank in vehicular traffic areas. The tank is designed for non-traffic applications.

Benefits:

• Strong compression molded polypropylene construction
• Lightweight plastic construction and inboard lifting lugs allow for easy delivery and handling
• Integral heavy-duty green lids that interconnect with EZsnap risers and pipe riser solutions
• Structurally reinforced access ports eliminate distortion during installation and pump-outs
• Reinforced structural ribbing and fiberglass bulkheads offer additional strength
• Can be installed with 6” to 48” (152 to 1,219 mm) of cover
• Can be pumped dry during pump-outs
• Suitable for use as a septic tank, pump tank, or rainwater (non-potable) tank
• No special water filling requirements are necessary
• The tank may be backfilled with suitable native soil. See installation instructions for guidance.

Specifications:

Size
61.7"W x 134"L x 54.5"H
(1567 mm x 3409 mm x 1384 mm)

Two Access Ports
Each 24" (610 mm)

Weight
331 lbs (151 kg)

Total Capacity
1309 gal (4956 L)

Working Capacity
1111 gal (4207 L)

Burial Depth
Minimum 6" (152 mm)
Maximum 48" (1219 mm)

The EZ-Snap Lid will accommodate CM & IM Tanks and both the narrow and the wide end of the EZ-Snap Risers.

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

Suitable for use as a pump tank, septic tank or rainwater tank in shallow, multiple, and serial tank configurations.

The Infiltrator IM-1250 is a lightweight strong and durable septic tank. This watertight tank design is offered with Infiltrator’s line of custom-fit risers and heavy-duty lids. Infiltrator injection molded tanks provide a revolutionary improvement in plastic septic tank design, offering long-term exceptional strength and watertightness.

Do not install the tank in vehicular traffic areas. The tank is designed for non-traffic applications.

Benefits:

• Strong injection molded polypropylene construction
• Lightweight plastic construction and inboard lifting lugs allow for easy delivery and handling
• Structurally reinforced access ports eliminate distortion during installation and pump-outs
• Reinforced structural ribbing and fiberglass bulkheads offers additional strength
• Can be installed with 6" to 48" of cover
• Can be pumped dry during pump-outs
• Suitable for use as a septic tank, pump tank, or rainwater (non-potable) tank
• No special installation, backfill or water filling procedures are required
• No special water filling requirements are necessary
• The tank may be backfilled with suitable native soil. See installation instructions for guidance.

Specifications:

Size
61.7"W x 152.3"L x 54.6"H
(1567 mm x 3868 mm x 1387 mm)

Two Access Ports
24" (610 mm)

Weight
405 lbs (184 kg)

Total Capacity
1480 gal (5602 L)

Working Capacity
1278 gal (4839 L)

Burial Depth
Minimum 6" (152 mm)
Maximum 48" (1219 mm)

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

Suitable for use as a pump tank, septic tank or rainwater tank in shallow, multiple, and serial tank configurations.

The Infiltrator IM-1530 is a lightweight strong and durable septic tank. This watertight tank design is offered with Infiltrator’s line of custom-fit risers and heavy-duty lids. Infiltrator injection molded tanks provide a revolutionary improvement in plastic septic tank design, offering long-term exceptional strength and watertightness.

Do not install the tank in vehicular traffic areas. The tank is designed for non-traffic applications.

Benefits:

• Strong injection molded polypropylene construction
• Lightweight plastic construction and inboard lifting lugs allow for easy delivery and handling
• Structurally reinforced access ports eliminate distortion during installation and pump-outs
• Reinforced structural ribbing and fiberglass bulkheads offers additional strength
• Can be installed with 6" to 48" of cover
• Can be pumped dry during pump-outs
• Suitable for use as a septic tank, pump tank, or rainwater (non-potable) tank
• No special installation, backfill or water filling procedures are required
• No special water filling requirements are necessary
• The tank may be backfilled with suitable native soil. See installation instructions for guidance.

Specifications:

Size
62"W x 176"L x 55"H
(1567 mm x 4460 mm x 1384 mm)

Access Port
24" (610 mm)

Weight
501 lbs (228 kg)

Total Capacity
1787 gal (6765 L)

Working Capacity
1537 gal (5818 L)

Burial Depth
Minimum 6" (152 mm)
Maximum 48" (1219 mm)

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

The Infiltrator IM-300 is a lightweight, strong and durable pump tank. This watertight tank design is offered with Infiltrator’s line of custom-fit risers and heavy-duty lids. Infiltrator injection molded tanks provide a revolutionary improvement in plastic tank design, offering exceptional long-term strength and watertightness.

Do not install the tank in vehicular traffic areas. The tank is designed for non-traffic applications.

Benefits:

• Strong injection molded polypropylene construction
• Lightweight plastic construction and inboard lifting lugs allow for easy delivery and handling
• Structurally reinforced access ports eliminate distortion during installation and pump-outs
• Reinforced structural ribbing and fiberglass bulkheads offers additional strength
• Can be installed with 6" to 48" of cover
• Can be pumped dry during pump-outs
• Suitable for use as a septic tank, pump tank, or rainwater (non-potable) tank
• No special installation, backfill or water filling procedures are required
• No special water filling requirements are necessary
• The tank may be backfilled with suitable native soil. See installation instructions for guidance.

Specifications:

Size
50.9"W x 50.9"L x 50.5"H
(1293 mm x 1293 mm x 1283 mm)

Two Access Ports
24" (610 mm)

Weight
110 lbs (50 kg)

Total Capacity
322 gal (1219 L)

Working Capacity
278 gal (1052 L)

Burial Depth
Minimum 6" (152 mm)
Maximum 52" (1321 mm)

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

Suitable for use as a pump tank, trash-tank, rainwater (non-potable) tank, or as the second compartment of an in-series septic tank.

The Infiltrator IM-540 is a lightweight strong and durable septic/pump tank. This watertight tank design is offered with Infiltrator’s line of custom-fit risers and heavy-duty lids. Infiltrator injection molded tanks provide a revolutionary improvement in plastic tank design, offering long-term exceptional strength and watertightness.

Do not install the tank in vehicular traffic areas. The tank is designed for non-traffic applications.

Benefits:

• Strong injection molded polypropylene construction
• Lightweight plastic construction and inboard lifting lugs allow for easy delivery and handling
• Structurally reinforced access ports eliminate distortion during installation and pump-outs
• Reinforced structural ribbing offers additional strength
• Can be installed with 6" to 48" of cover
• Can be pumped dry during pump-outs
• Suitable for use as a pump tank or rainwater (non-potable) tank
• No special installation, backfill or water filling procedures are required
• No special water filling requirements are necessary
• The tank may be backfilled with suitable native soil. See installation instructions for guidance.

Specifications:

Size
61.7"W x 64.9"L x 54.6"H
(1567 mm x 1648 mm x 1387 mm)

Access Port
24" (610 mm)

Weight
169 lbs (77 kg)

Total Capacity
552 gal (2090 L)

Burial Depth
Minimum 6" (152 mm)
Maximum 48" (1219 mm)

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

This end cap features pipe cutouts on the right and left column designed to accommodate inspection ports, clean outs, or inlet pipes on either side of the end cap. These pipe locations allow easy access for maintenance and alignment when running pressure pipe through the chamber. The Quick4 Plus™ All-in-One 8 Endcap may be used at either end of a chamber row or can be installed mid-trench for an inspection port, cleanout or inlet/outlet pipe. The mid-trench connection feature allows construction of chamber rows with center feed inletting for easy installation of serial distribution systems. Pipe connection options allow for side, end or top inletting.

Benefits:

• May be used at the end of chamber row for an inlet/outlet or can be installed mid-trench
• Mid-trench connection feature allows center feed inletting of chamber rows
• Center-feed connection allows for easy installation of serial distribution systems
• Variable pipe connection options allow for side, end or top inletting
• Piping drill points are set for gravity or pressure pipe

Specifications:

Size
18"W x 15"L x 8"H
(46 cm x 38 cm x 20 cm)

Installed Length
10.4" (26 cm)

Invert Height
3.3" (8 cm), 9" (23 cm)

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

The Quick4 Plus™ Standard Low Profile (LP) offers maximum strength through its four center structural columns. This chamber can be installed in a 36" wide trench. It is shorter in height than Infiltrator’s other Standard model chambers, allowing for shallow installation. Like the original line of Quick4® chambers, it offers advanced contouring capability with its Contour Swivel Connection™, which permits turns up to 10°, right or left.

Benefits:

• Low profile design makes this chamber ideal for shallow applications
• Reduces imported fill needed for cap and fill systems
• Four center structural columns offer superior strength
• Advanced contouring connections
• Latching mechanism allows for quick installation
• Four-foot chamber lengths are easy to handle and install
• Supports wheel loads of 16,000 lbs/axle with 12" of cover

Specifications:

Size
34"W x 53"L x 8"H
(864 mm x 1346 mm x 203 mm)

Effective Length
48" (1219 mm)

Louver Height
6.3" (160 mm)

Storage Capacity
32 gal (121 L)

Invert Height
3.3" (84 mm), 9.6" (244 mm)

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

For use with the Quick4 Plus™ Low Profile chambers, the Quick4 Plus endcap offers a simple, flat design and allows installation of a pipe from the end of the chamber rows. Piping drill points are set for gravity or pressure points.

Benefits:

• Simple, flat design
• Allows installation of a pipe from the end only
• Piping drill points are set for gravity or pressure pipe

Specifications:

Size
18"W x 7"L x 8"H
(457 mm x 177 mm x 203 mm)

Additional Length per Trench
4.5" (114 mm)

Invert Height
3.3" (84 mm)

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

The Quick4 Plus™ All-In-One 12 Endcap may be used at either end of the chamber row for an inlet/outlet or can be installed mid-trench. The mid-trench connection feature allows construction of chamber rows with a center-feed, as an alternative to inletting at the ends of chamber rows. Center-feed connections allow for easy installation of serial distribution systems. Pipe connection options include sides, ends or top.

Benefits:

• May be used at the end of chamber row for an inlet/outlet or can be installed mid-trench
• Mid-trench connection feature allows construction of chamber rows with center feed, as an alternative to inletting at the ends of chamber rows
• Center-feed connection allows for easy installation of serial distribution systems
• Pipe connection options include sides, ends or top

Specifications:

Size
33"W x 20.5"L x 13"H
(838 mm x 520 mm x 330 mm)

Additional Length per Trench
18.2" (462 mm)

Invert Height
5.3" (134 mm), 8" (203 mm)

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

The Quick4 Plus™ Standard chamber offers maximum strength through its two center structural columns. This chamber can be installed in a 36" wide trench. Like the original line of Quick4® chambers, it offers advanced contouring capability with its Contour Swivel Connection™ which permits turns up to 10°, right or left. It is also available in 4' lengths to provide optimal installation flexibility.

Benefits:

• Two center structural columns offer increased stability and superior strength
• Advanced contouring connections
• Latching mechanism allows for quick installation
• Four-foot chamber lengths are easy to handle and install
• Supports wheel loads of 16,000 lbs/axle with 12" of cover

Specifications:

Size
34"W x 53"L x 12"H
(864 mm x 1346 mm x 305 mm)

Effective Length
48" (1219 mm)

Louver Height
8" (203 mm)

Storage Capacity
47 gal (178 L)

Invert Height
0.6" (15 mm), 5.3" (135 mm),
8.0" (203 mm), 12.7" (323 mm)

MarMacʼs Chemical Resistant PolySeal (PolySeal CR) is specified for stormwater and sanitary sewer gravity-flow applications. When installed in contaminated soils (principally hydrocarbon-based), PolySeal CR will prevent inflow/infiltration and exfiltration into the joint in which it is installed.  It is designed to maintain the joint integrity, including in less than perfect bedding conditions. 

Chemical Resistant PolySeal (PolySeal CR) uses a proprietary, co-extruded, multi-layer barrier film lamination on the outside of the coupler. This film has been tested per ASTM F739 against a battery of chemicals at 95% concentration for permeation resistance with excellent results, including Benzene, Toluene and other hydrocarbon based solvents.

PolySeal Couplings are perfect for cut & butt joints, field repairs, new detention systems, and more.