shop our products

Search for: infiltrator

36

36" MarMac MacWrap RCP Coupler (RCP to RCP)

Buy Now!
  • SKU: MM-MWRAP36RCP
  • Brand:

  • Product Description:

    MarMac MacWrap is a highly-advanced, external joint coupler designed to permanently prevent infiltration at precast concrete structure connections, including reinforced concrete pipe (RCP), manhole sections, box culverts & stormwater retention systems, and many other round or elliptical concrete structures.

    External seals for reinforced concrete pipe joints

    MacWrap for RCP (Reinforced Concrete Pipe) is a high performance, external joint coupler designed for the prevention of infiltration and resistance of exfiltration at joints of bell-and-spigot, tongue-and-groove, round, or elliptical RCP.

    MacWrap’s specially formulated mastic is designed to aggressively adhere to the exterior concrete pipe surface, with the tightened mechanical straps creating a nearly indestructible seal. MacWrap for RCP  is permanent, immediately inspectable, and boasts a 100% success rate. Simply put, MarMac MacWrap is the best there is.

    MacWrap Couplers integrate several unique components into a single, customizable, full-perimeter, external sealing band. Our specially-formulated mastic provides a positive seal against infiltration. The coupling membrane is reinforced by internalized woven polypropylene with a heavy duty polyethylene backing and secured by high-tensile compression bands with tensioning ratchets.
    • Size: 36" ID  44" OD  
    • Strong, permanent, shear & puncture resistant
    • Specially-formulated mastic layer
    • Easily installed & immediately inspectable
    • Full-perimeter, positive seal = infiltration-proof
    • Heavy-duty, high-quality design
    • Protection from corrosion, acids & alkali by using a MacWrap CR (Chemical Resistant)

    ***SPECIAL ORDER*** 

    ***Non-cancellable and non-returnable***

    Available in sizes 12" - 144" Round & Elliptical 

    Other MacWrap versions available:

    • MacWrap for Manholes
    • MacWrap for Box Culverts
    • MacWrap Chem-Resistant
    • MacWrap Repair Coupler

    SPECIFICATION

    MacWrap integrates several unique components into a single, full-perimeter, external sealing band. The coupler composition consists of:

    • Heavy duty polyethylene backing
    • Internal woven polypropylene reinforcement
    • High-tensile compression bands
    • Specially formulated mastic contact layer

    INSTALLATION

    Surface preparations: Inspect the outside of the joint. Brush and/or repair surface as needed to ensure there are no loose materials or voids. If installing on horizontal pipe, dig the bell hole for complete access to the joint.

    The coupler shall be placed around the pipe, mastic side centered on the pipe joint, and then the protective release film shall be removed. The straps will then be tensioned and secured with preinstalled ratchet tensioners. The closing flap shall cover the service area and exposed straps, completing the installation. Backfill may commence immediately following the inspection of proper sealing band installation.

    CAUTION: *All statements and technical information are based on tests and/or data which MarMac Manufacturing deems reliable, however, MarMac does not warrant or guarantee the accuracy or completeness of such information. Please read further manufacturer liability and warranty information.


36

36" MarMac MacWrap Repair Coupler (RCP to RCP) (24" Wide)

Buy Now!
  • SKU: MM-MWREP36RCP
  • Brand:

  • Product Description:

    MACWRAP REPAIR COUPLER

    MacWrap Repair Coupler is an advanced, external joint coupler, specifically designed to repair compromised joints of precast structures while simultaneously preventing infiltration. MacWrap Repair couplings can be used for the rehabilitation of tongue & groove and bell & spigot reinforced concrete pipe as well as manhole sections, restoring the integrity of damaged joints.

    With its membrane comprised of the same materials as a standard MacWrap, the width of MacWrap Repair Couplers is increased to 24”, four compression bands are utilized versus the standard two, and the thickness is increased by approximately 50%. This is a heavy-duty, 3-ply coupler as the membrane contains an additional layer of polyethylene and mastic.

    External seals for reinforced concrete pipe joints

    • Size: 36" ID  44" OD  
    • Strong, permanent, shear & puncture resistant
    • Specially-formulated mastic layer
    • Easily installed & immediately inspectable
    • Full-perimeter, positive seal = infiltration-proof
    • Heavy-duty, high-quality design
    • Protection from corrosion, acids & alkali by using a MacWrap CR (Chemical Resistant)

    ***SPECIAL ORDER*** 

    ***Non-cancellable and non-returnable***

    Available in sizes 12" - 144" Round & Elliptical 

    Other MacWrap versions available:

    • MacWrap for Manholes
    • MacWrap for Box Culverts
    • MacWrap Chem-Resistant
    • MacWrap RCP Coupler

    SPECIFICATION

    MacWrap integrates several unique components into a single, full-perimeter, external sealing band. The coupler composition consists of:

    • Heavy duty polyethylene backing
    • Internal woven polypropylene reinforcement
    • High-tensile compression bands
    • Specially formulated mastic contact layer

    INSTALLATION

    Surface preparations: Inspect the outside of the joint. Brush and/or repair surface as needed to ensure there are no loose materials or voids. If installing on horizontal pipe, dig the bell hole for complete access to the joint.

    The coupler shall be placed around the pipe, mastic side centered on the pipe joint, and then the protective release film shall be removed. The straps will then be tensioned and secured with preinstalled ratchet tensioners. The closing flap shall cover the service area and exposed straps, completing the installation. Backfill may commence immediately following the inspection of proper sealing band installation.

    CAUTION: *All statements and technical information are based on tests and/or data which MarMac Manufacturing deems reliable, however, MarMac does not warrant or guarantee the accuracy or completeness of such information. Please read further manufacturer liability and warranty information.


36

36" MarMac Standard PolySeal Coupler 3667RC

Buy Now!
  • SKU: MM-POLY-36STD
  • Brand:

  • Product Description:

    MarMac PolySeal is a flexible, high-strength pipe coupling that permanently seals and restrains corrugated plastic pipe. PolySeal Couplers are over-engineered, reinforced external joint seals designed to connect HDPE / HDPP corrugated pipe, while remaining both infiltration proof and exfiltration resistant. PolySeal Couplings are perfect for cut & butt joints, field repairs, new detention systems, and more. 

    MarMac’s Standard PolySeal is a high performance, external joint coupler designed for the prevention of infiltration and resistance of exfiltration at joints of common HDPE & HDPP corrugated pipe.

    Our standard PolySeal coupler has three integrated compression bands. Sizes under 30″ are standard-duty and use hose clamp bands made of high-strength 409 or 304 stainless steel. Heavy-duty sizes over 30″ contain an additional membrane layer of polyethylene and mastic, and utilize built-in ratchet straps.

    • Fits corrugated HDPE & HDPP pipe
    • Size: 36"
    • Compression Bands: 3 Built-In Ratchet Straps
    • Infiltration-proof exfiltration-resistant
    • Easily installed & immediately inspectable
    • Millions installed today with nearly a 100% success rate
    • Permanent protection with proven performance
    • Strong, shear & puncture-resistant

    SPECIFICATION

    PolySeal is manufactured with interval layers of our rubberized mastic, specially formulated to adhere aggressively to all known pipe surfaces. A sheet of puncture and shear-resistant woven polypropylene, and an outside backing of cross-laminated polyethylene makes PolySeal resistant to most acids and bases (additional protection available with Chemical Resistant PolySeal). The integrated compression bands mechanically “lock” into the corrugations of the pipe, bonding the mastic to the pipe wall, and forming a permanent seal.

    The minimum length of a PolySeal Coupler is the circumference of the outside diameter of the pipe, plus eight inches for overlap.

    INSTALLATION

    Surface preparations: Inspect the outside of the joint. Brush surface as needed to ensure it is free of debris. If installing on horizontal pipe, dig a bell hole for complete access to the joint.

    The coupler shall be placed around the pipe with the mastic side to the pipe wall and spanning the joint, while centered on the joint gap to be sealed. The protective film shall be removed and the coupler applied with the overlap at the top of the pipe. The tensioning straps shall be aligned between the pipe corrugations and tightened. The closing flap protective film shall be removed and the closing flap shall cover the exposed straps and the work area.

    Also Available:

    CAUTION: *All statements and technical information are based on tests and/or data which MarMac Manufacturing deems reliable, however, MarMac does not warrant or guarantee the accuracy or completeness of such information. Please read further manufacturer liability and warranty information.


36

36" MarMac Universal CMP DP Coupler (CMP to HDPE-HDPP-PVC)

Buy Now!
  • SKU: MM-DPUNIV-CMP36
  • Brand:

  • Product Description:

    MarMac Dissimilar Pipe Couplers (DP Couplers) are engineered to join, seal, and restrain the connections between pipes of differing material and/or pipes of varying nominal size*. These unique, external sealing bands are reinforced and prevent infiltration into gravity-flow drainage systems.

    The UNIVERSAL CMP DP Coupler is a four-compression band, heavy duty (3-ply, 180 mil thickness) coupler designed to join CMP/CSP (both rerolled and non-rerolled/plain/cut end) to any other type of pipe in that nominal size with an OD up to that of corrugated HDPE/HDPP and down to that of SCH40 PVC.

    NOTE: For CMP-to-CMP connections go to MarMac CMP Pipe Couplers (soil-tight and water-tight versions available).

    DP Couplers integrate several unique components into a single, customizable, full-perimeter, external sealing band. Our specially-formulated, rubberized mastic aggressively adheres to all known pipe surfaces, providing a positive seal to battle infiltration. The coupling is reinforced with a sheet of durable, woven polypropylene which provides shear and puncture resistance. They are constructed with four integrated compression bands, which when tightened, form a mechanical seal, permanently bonding the mastic to the pipe wall.

    • Size: 36"
    • Connection: CMP to HDPE/HDPP/PVC (Size on Size)
    • Strong, permanent, shear & puncture resistant
    • Easily installed & immediately inspectable
    • Tens of thousands in use today with nearly a 100% success rate
    • Full-perimeter, positive seal = infiltration-proof
    • Specially formulated mastic layer
    • Heavy-duty, high quality construction

    ***SPECIAL ORDER*** 

    ***Non-cancellable and non-returnable***

    SPECIFICATION

    DP Couplers are strategically manufactured with cross-laminated polyethylene, woven polypropylene, rubberized “cold-flow” mastic, as well as integrated compression bands, similar to MarMac’s PolySeal couplers. DP Couplers are three-ply with a total thickness of approximately 180 mils. 

    INSTALLATION

    The coupler shall be placed around the pipe, mastic side to the pipe, spanning the joint. The protective release film shall be removed and the coupler applied with the overlap at the top of the pipe. The straps shall be secured (outside straps first) on the larger outside diameter pipe (when applicable) with the proper tools. Then, the straps on the outside of the smaller outside diameter pipe shall be secured. The inside straps shall be tightened last. The closing flap shall cover the exposed strap work area, completing the joint.

    CAUTION: *All statements and technical information are based on tests and/or data which MarMac Manufacturing deems reliable, however, MarMac does not warrant or guarantee the accuracy or completeness of such information. Please read further manufacturer liability and warranty information.


36

36" MarMac Universal DP Coupler (RCP to HDPE-HDPP-PVC)

Buy Now!
  • SKU: MM-DPUNIV-36
  • Brand:

  • Product Description:

    MarMac Dissimilar Pipe Couplers (DP Couplers) are engineered to join, seal, and restrain the connections between pipes of differing material and/or pipes of varying nominal size*. These unique, external sealing bands are reinforced and prevent infiltration into gravity-flow drainage systems.

    The UNIVERSAL DP Coupler is a four-compression band, heavy-duty (3-ply, 180 mil thickness) coupler designed to join two, size for size pipes with ODs up to that of “B” wall RCP (no bell) and down to that of SCH40 PVC, and practically every other type of pipe in that nominal size, with the exception of CMP/CSP.  FOR CMP See MM-DPUNIV-36CMP

    DP Couplers integrate several unique components into a single, customizable, full-perimeter, external sealing band. Our specially-formulated, rubberized mastic aggressively adheres to all known pipe surfaces, providing a positive seal to battle infiltration. The coupling is reinforced with a sheet of durable, woven polypropylene which provides shear and puncture resistance. They are constructed with four integrated compression bands, which when tightened, form a mechanical seal, permanently bonding the mastic to the pipe wall.

    • Size: 36"
    • Max OD Large End - 44" "B" Wall RCP
    • Min OD Small End - 36"
    • Strong, permanent, shear & puncture resistant
    • Easily installed & immediately inspectable
    • Tens of thousands in use today with nearly a 100% success rate
    • Full-perimeter, positive seal = infiltration-proof
    • Specially formulated mastic layer
    • Heavy-duty, high quality construction

    SPECIFICATION

    DP Couplers are strategically manufactured with cross-laminated polyethylene, woven polypropylene, rubberized “cold-flow” mastic, as well as integrated compression bands, similar to MarMac’s PolySeal couplers. DP Couplers are three-ply with a total thickness of approximately 180 mils. 

    INSTALLATION

    The coupler shall be placed around the pipe, mastic side to the pipe, spanning the joint. The protective release film shall be removed and the coupler applied with the overlap at the top of the pipe. The straps shall be secured (outside straps first) on the larger outside diameter pipe (when applicable) with the proper tools. Then, the straps on the outside of the smaller outside diameter pipe shall be secured. The inside straps shall be tightened last. The closing flap shall cover the exposed strap work area, completing the joint.

    CAUTION: *All statements and technical information are based on tests and/or data which MarMac Manufacturing deems reliable, however, MarMac does not warrant or guarantee the accuracy or completeness of such information. Please read further manufacturer liability and warranty information.


4

4" MarMac DP Dissimilar Coupler - Common Connections

Buy Now!
  • SKU: MM-DP-04SPECIAL
  • Brand:

  • Product Description:

    MarMac Dissimilar Pipe Couplers (DP Couplers) are engineered to join, seal, and restrain the connections between pipes of differing material and/or pipes of varying nominal size*. These unique, external sealing bands are reinforced and prevent infiltration into gravity-flow drainage systems.

    *While dependent upon pipe material(s) and/or overall pipe diameter(s), the difference in diameter must not exceed 15% or 8″ to allow for proper step-down.

    DP Couplers integrate several unique components into a single, customizable, full-perimeter, external sealing band. Our specially-formulated, rubberized mastic aggressively adheres to all known pipe surfaces, providing a positive seal to battle infiltration. The coupling is reinforced with a sheet of durable, woven polypropylene which provides shear and puncture resistance. They are constructed with four integrated compression bands, which when tightened, form a mechanical seal, permanently bonding the mastic to the pipe wall.

    • Size: 4"

    Some of our most popular pipe jointing scenarios are below. This is by no means a comprehensive list or a suggestion that these connections perform better than others. Dissimilar Pipe Couplers are able to connect virtually any structurally sound pipe material with another. DP Couplings are also a great choice for two pipes of the same material, but with differing nominal diameter. The aforementioned diameters however, must be reasonably close to account for proper step-down/reduction.

    1. RCP to HDPE/HDPP
    2. CMP to HDPE/HDPP (Must note if CMP has annular / re-rolled or spiral  /non-rerolled ends)
    3. CMP to RCP  (Must note if CMP has annular / re-rolled or spiral / non-rerolled ends)
    4. PVC to HDPE/HDPP

    ***SPECIAL ORDER*** 

    ***Non-cancellable and non-returnable***

    • Strong, permanent, shear & puncture resistant
    • Easily installed & immediately inspectable
    • Tens of thousands in use today with nearly a 100% success rate
    • Full-perimeter, positive seal = infiltration-proof
    • Specially formulated mastic layer
    • Heavy-duty, high quality construction

    SPECIFICATION

    DP Couplers are strategically manufactured with cross-laminated polyethylene, woven polypropylene, rubberized “cold-flow” mastic, as well as integrated compression bands, similar to MarMac’s PolySeal couplers. DP Couplers are three-ply with a total thickness of approximately 180 mils. 

    INSTALLATION

    The coupler shall be placed around the pipe, mastic side to the pipe, spanning the joint. The protective release film shall be removed and the coupler applied with the overlap at the top of the pipe. The straps shall be secured (outside straps first) on the larger outside diameter pipe (when applicable) with the proper tools. Then, the straps on the outside of the smaller outside diameter pipe shall be secured. The inside straps shall be tightened last. The closing flap shall cover the exposed strap work area, completing the joint.

    CAUTION: *All statements and technical information are based on tests and/or data which MarMac Manufacturing deems reliable, however, MarMac does not warrant or guarantee the accuracy or completeness of such information. Please read further manufacturer liability and warranty information.


4

4" MarMac Standard PolySeal Coupler 0467RC

Buy Now!
  • SKU: MM-POLY-04STD
  • Brand:

  • Product Description:

    MarMac PolySeal is a flexible, high-strength pipe coupling that permanently seals and restrains corrugated plastic pipe. PolySeal Couplers are over-engineered, reinforced external joint seals designed to connect HDPE / HDPP corrugated pipe, while remaining both infiltration proof and exfiltration resistant. PolySeal Couplings are perfect for cut & butt joints, field repairs, new detention systems, and more. 

    MarMac’s Standard PolySeal is a high performance, external joint coupler designed for the prevention of infiltration and resistance of exfiltration at joints of common HDPE & HDPP corrugated pipe.

    Our standard PolySeal coupler has three integrated compression bands. Sizes under 30″ are standard-duty and use hose clamp bands made of high-strength 409 or 304 stainless steel. Heavy-duty sizes over 30″ contain an additional membrane layer of polyethylene and mastic, and utilize built-in ratchet straps.

    • Fits corrugated HDPE & HDPP pipe
    • Size: 4"
    • Compression Bands: 3 Hose Clamp Bands
    • Infiltration-proof exfiltration-resistant
    • Easily installed & immediately inspectable
    • Millions installed today with nearly a 100% success rate
    • Permanent protection with proven performance
    • Strong, shear & puncture-resistant

    SPECIFICATION

    PolySeal is manufactured with interval layers of our rubberized mastic, specially formulated to adhere aggressively to all known pipe surfaces. A sheet of puncture and shear-resistant woven polypropylene, and an outside backing of cross-laminated polyethylene makes PolySeal resistant to most acids and bases (additional protection available with Chemical Resistant PolySeal). The integrated compression bands mechanically “lock” into the corrugations of the pipe, bonding the mastic to the pipe wall, and forming a permanent seal.

    The minimum length of a PolySeal Coupler is the circumference of the outside diameter of the pipe, plus eight inches for overlap.

    INSTALLATION

    Surface preparations: Inspect the outside of the joint. Brush surface as needed to ensure it is free of debris. If installing on horizontal pipe, dig a bell hole for complete access to the joint.

    The coupler shall be placed around the pipe with the mastic side to the pipe wall and spanning the joint, while centered on the joint gap to be sealed. The protective film shall be removed and the coupler applied with the overlap at the top of the pipe. The tensioning straps shall be aligned between the pipe corrugations and tightened. The closing flap protective film shall be removed and the closing flap shall cover the exposed straps and the work area.

    Also Available:

    CAUTION: *All statements and technical information are based on tests and/or data which MarMac Manufacturing deems reliable, however, MarMac does not warrant or guarantee the accuracy or completeness of such information. Please read further manufacturer liability and warranty information.


42

42" MarMac Double-Wide PolySeal Coupler 4267RCD

Buy Now!
  • SKU: MM-POLY-42DBL
  • Brand:

  • Product Description:

    MarMac PolySeal is a flexible, high-strength pipe coupling that permanently seals and restrains corrugated plastic pipe. PolySeal Couplers are over-engineered, reinforced external joint seals designed to connect HDPE / HDPP corrugated pipe, while remaining both infiltration proof and exfiltration resistant. PolySeal Couplings are perfect for cut & butt joints, field repairs, new detention systems, and more. 

    MarMac’s Double-Wide PolySeal Couplings are heavy-duty 3-ply as they are manufactured with an additional layer of polyethylene and mastic. Nearly twice the width of a standard PolySeal, our Double-Wide PolySeal Coupler comes with five integrated compression bands, as opposed to three with our Standard coupler.

    Our Double-Wide PolySeal coupler has five integrated compression bands. Sizes under 30″ are standard-duty and use hose clamp bands made of high-strength 409 or 304 stainless steel. Heavy-duty sizes over 30″ contain an additional membrane layer of polyethylene and mastic, and utilize built-in ratchet straps.

    Common uses include repairs, such as instances where pipe ends have minor damage or to cover small punctures in a pipe caused by fork trucks or similar. Additionally, Double-Wide PolySeal can be used in place of standard PolySeal to make a stronger, stiffer joint.

    • Fits corrugated HDPE & HDPP pipe
    • Size: 42"
    • Compression Bands: 5 Built-In Ratchet Clamps
    • Infiltration-proof exfiltration-resistant
    • Easily installed & immediately inspectable
    • Millions installed today with nearly a 100% success rate
    • Permanent protection with proven performance
    • Strong, shear & puncture-resistant

    SPECIFICATION

    PolySeal is manufactured with interval layers of our rubberized mastic, specially formulated to adhere aggressively to all known pipe surfaces. A sheet of puncture and shear-resistant woven polypropylene, and an outside backing of cross-laminated polyethylene makes PolySeal resistant to most acids and bases (additional protection available with Chemical Resistant PolySeal). The integrated compression bands mechanically “lock” into the corrugations of the pipe, bonding the mastic to the pipe wall, and forming a permanent seal.

    The minimum length of a PolySeal Coupler is the circumference of the outside diameter of the pipe, plus eight inches for overlap.

    INSTALLATION

    Surface preparations: Inspect the outside of the joint. Brush surface as needed to ensure it is free of debris. If installing on horizontal pipe, dig a bell hole for complete access to the joint.

    The coupler shall be placed around the pipe with the mastic side to the pipe wall and spanning the joint, while centered on the joint gap to be sealed. The protective film shall be removed and the coupler applied with the overlap at the top of the pipe. The tensioning straps shall be aligned between the pipe corrugations and tightened. The closing flap protective film shall be removed and the closing flap shall cover the exposed straps and the work area.

    Also Available:

    CAUTION: *All statements and technical information are based on tests and/or data which MarMac Manufacturing deems reliable, however, MarMac does not warrant or guarantee the accuracy or completeness of such information. Please read further manufacturer liability and warranty information.


42

42" MarMac DP Dissimilar Coupler - Common Connections

Buy Now!
  • SKU: MM-DP-42SPECIAL
  • Brand:

  • Product Description:

    MarMac Dissimilar Pipe Couplers (DP Couplers) are engineered to join, seal, and restrain the connections between pipes of differing material and/or pipes of varying nominal size*. These unique, external sealing bands are reinforced and prevent infiltration into gravity-flow drainage systems.

    *While dependent upon pipe material(s) and/or overall pipe diameter(s), the difference in diameter must not exceed 15% or 8″ to allow for proper step-down.

    DP Couplers integrate several unique components into a single, customizable, full-perimeter, external sealing band. Our specially-formulated, rubberized mastic aggressively adheres to all known pipe surfaces, providing a positive seal to battle infiltration. The coupling is reinforced with a sheet of durable, woven polypropylene which provides shear and puncture resistance. They are constructed with four integrated compression bands, which when tightened, form a mechanical seal, permanently bonding the mastic to the pipe wall.

    • Size: 42"

    Some of our most popular pipe jointing scenarios are below. This is by no means a comprehensive list or a suggestion that these connections perform better than others. Dissimilar Pipe Couplers are able to connect virtually any structurally sound pipe material with another. DP Couplings are also a great choice for two pipes of the same material, but with differing nominal diameter. The aforementioned diameters however, must be reasonably close to account for proper step-down/reduction.

    1. RCP to HDPE/HDPP
    2. CMP to HDPE/HDPP (Must note if CMP has annular / re-rolled or spiral  /non-rerolled ends)
    3. CMP to RCP  (Must note if CMP has annular / re-rolled or spiral / non-rerolled ends)
    4. PVC to HDPE/HDPP

    ***SPECIAL ORDER*** 

    ***Non-cancellable and non-returnable***

    • Strong, permanent, shear & puncture resistant
    • Easily installed & immediately inspectable
    • Tens of thousands in use today with nearly a 100% success rate
    • Full-perimeter, positive seal = infiltration-proof
    • Specially formulated mastic layer
    • Heavy-duty, high quality construction

    SPECIFICATION

    DP Couplers are strategically manufactured with cross-laminated polyethylene, woven polypropylene, rubberized “cold-flow” mastic, as well as integrated compression bands, similar to MarMac’s PolySeal couplers. DP Couplers are three-ply with a total thickness of approximately 180 mils. 

    INSTALLATION

    The coupler shall be placed around the pipe, mastic side to the pipe, spanning the joint. The protective release film shall be removed and the coupler applied with the overlap at the top of the pipe. The straps shall be secured (outside straps first) on the larger outside diameter pipe (when applicable) with the proper tools. Then, the straps on the outside of the smaller outside diameter pipe shall be secured. The inside straps shall be tightened last. The closing flap shall cover the exposed strap work area, completing the joint.

    CAUTION: *All statements and technical information are based on tests and/or data which MarMac Manufacturing deems reliable, however, MarMac does not warrant or guarantee the accuracy or completeness of such information. Please read further manufacturer liability and warranty information.


42

42" MarMac MacWrap RCP Coupler (RCP to RCP)

Buy Now!
  • SKU: MM-MWRAP42RCP
  • Brand:

  • Product Description:

    MarMac MacWrap is a highly-advanced, external joint coupler designed to permanently prevent infiltration at precast concrete structure connections, including reinforced concrete pipe (RCP), manhole sections, box culverts & stormwater retention systems, and many other round or elliptical concrete structures.

    External seals for reinforced concrete pipe joints

    MacWrap for RCP (Reinforced Concrete Pipe) is a high performance, external joint coupler designed for the prevention of infiltration and resistance of exfiltration at joints of bell-and-spigot, tongue-and-groove, round, or elliptical RCP.

    MacWrap’s specially formulated mastic is designed to aggressively adhere to the exterior concrete pipe surface, with the tightened mechanical straps creating a nearly indestructible seal. MacWrap for RCP  is permanent, immediately inspectable, and boasts a 100% success rate. Simply put, MarMac MacWrap is the best there is.

    MacWrap Couplers integrate several unique components into a single, customizable, full-perimeter, external sealing band. Our specially-formulated mastic provides a positive seal against infiltration. The coupling membrane is reinforced by internalized woven polypropylene with a heavy duty polyethylene backing and secured by high-tensile compression bands with tensioning ratchets.
    • Size: 42" ID  51" OD  
    • Strong, permanent, shear & puncture resistant
    • Specially-formulated mastic layer
    • Easily installed & immediately inspectable
    • Full-perimeter, positive seal = infiltration-proof
    • Heavy-duty, high-quality design
    • Protection from corrosion, acids & alkali by using a MacWrap CR (Chemical Resistant)

    ***SPECIAL ORDER*** 

    ***Non-cancellable and non-returnable***

    Available in sizes 12" - 144" Round & Elliptical 

    Other MacWrap versions available:

    • MacWrap for Manholes
    • MacWrap for Box Culverts
    • MacWrap Chem-Resistant
    • MacWrap Repair Coupler

    SPECIFICATION

    MacWrap integrates several unique components into a single, full-perimeter, external sealing band. The coupler composition consists of:

    • Heavy duty polyethylene backing
    • Internal woven polypropylene reinforcement
    • High-tensile compression bands
    • Specially formulated mastic contact layer

    INSTALLATION

    Surface preparations: Inspect the outside of the joint. Brush and/or repair surface as needed to ensure there are no loose materials or voids. If installing on horizontal pipe, dig the bell hole for complete access to the joint.

    The coupler shall be placed around the pipe, mastic side centered on the pipe joint, and then the protective release film shall be removed. The straps will then be tensioned and secured with preinstalled ratchet tensioners. The closing flap shall cover the service area and exposed straps, completing the installation. Backfill may commence immediately following the inspection of proper sealing band installation.

    CAUTION: *All statements and technical information are based on tests and/or data which MarMac Manufacturing deems reliable, however, MarMac does not warrant or guarantee the accuracy or completeness of such information. Please read further manufacturer liability and warranty information.


42

42" MarMac MacWrap Repair Coupler (RCP to RCP) (24" Wide)

Buy Now!
  • SKU: MM-MWREP42RCP
  • Brand:

  • Product Description:

    MACWRAP REPAIR COUPLER

    MacWrap Repair Coupler is an advanced, external joint coupler, specifically designed to repair compromised joints of precast structures while simultaneously preventing infiltration. MacWrap Repair couplings can be used for the rehabilitation of tongue & groove and bell & spigot reinforced concrete pipe as well as manhole sections, restoring the integrity of damaged joints.

    With its membrane comprised of the same materials as a standard MacWrap, the width of MacWrap Repair Couplers is increased to 24”, four compression bands are utilized versus the standard two, and the thickness is increased by approximately 50%. This is a heavy-duty, 3-ply coupler as the membrane contains an additional layer of polyethylene and mastic.

    External seals for reinforced concrete pipe joints

    • Size: 42" ID  51" OD  
    • Strong, permanent, shear & puncture resistant
    • Specially-formulated mastic layer
    • Easily installed & immediately inspectable
    • Full-perimeter, positive seal = infiltration-proof
    • Heavy-duty, high-quality design
    • Protection from corrosion, acids & alkali by using a MacWrap CR (Chemical Resistant)

    ***SPECIAL ORDER*** 

    ***Non-cancellable and non-returnable***

    Available in sizes 12" - 144" Round & Elliptical 

    Other MacWrap versions available:

    • MacWrap for Manholes
    • MacWrap for Box Culverts
    • MacWrap Chem-Resistant
    • MacWrap RCP Coupler

    SPECIFICATION

    MacWrap integrates several unique components into a single, full-perimeter, external sealing band. The coupler composition consists of:

    • Heavy duty polyethylene backing
    • Internal woven polypropylene reinforcement
    • High-tensile compression bands
    • Specially formulated mastic contact layer

    INSTALLATION

    Surface preparations: Inspect the outside of the joint. Brush and/or repair surface as needed to ensure there are no loose materials or voids. If installing on horizontal pipe, dig the bell hole for complete access to the joint.

    The coupler shall be placed around the pipe, mastic side centered on the pipe joint, and then the protective release film shall be removed. The straps will then be tensioned and secured with preinstalled ratchet tensioners. The closing flap shall cover the service area and exposed straps, completing the installation. Backfill may commence immediately following the inspection of proper sealing band installation.

    CAUTION: *All statements and technical information are based on tests and/or data which MarMac Manufacturing deems reliable, however, MarMac does not warrant or guarantee the accuracy or completeness of such information. Please read further manufacturer liability and warranty information.


42

42" MarMac Standard PolySeal Coupler 4267RC

Buy Now!
  • SKU: MM-POLY-42STD
  • Brand:

  • Product Description:

    MarMac PolySeal is a flexible, high-strength pipe coupling that permanently seals and restrains corrugated plastic pipe. PolySeal Couplers are over-engineered, reinforced external joint seals designed to connect HDPE / HDPP corrugated pipe, while remaining both infiltration proof and exfiltration resistant. PolySeal Couplings are perfect for cut & butt joints, field repairs, new detention systems, and more. 

    MarMac’s Standard PolySeal is a high performance, external joint coupler designed for the prevention of infiltration and resistance of exfiltration at joints of common HDPE & HDPP corrugated pipe.

    Our standard PolySeal coupler has three integrated compression bands. Sizes under 30″ are standard-duty and use hose clamp bands made of high-strength 409 or 304 stainless steel. Heavy-duty sizes over 30″ contain an additional membrane layer of polyethylene and mastic, and utilize built-in ratchet straps.

    • Fits corrugated HDPE & HDPP pipe
    • Size: 42"
    • Compression Bands: 3 Built-In Ratchet Straps
    • Infiltration-proof exfiltration-resistant
    • Easily installed & immediately inspectable
    • Millions installed today with nearly a 100% success rate
    • Permanent protection with proven performance
    • Strong, shear & puncture-resistant

    SPECIFICATION

    PolySeal is manufactured with interval layers of our rubberized mastic, specially formulated to adhere aggressively to all known pipe surfaces. A sheet of puncture and shear-resistant woven polypropylene, and an outside backing of cross-laminated polyethylene makes PolySeal resistant to most acids and bases (additional protection available with Chemical Resistant PolySeal). The integrated compression bands mechanically “lock” into the corrugations of the pipe, bonding the mastic to the pipe wall, and forming a permanent seal.

    The minimum length of a PolySeal Coupler is the circumference of the outside diameter of the pipe, plus eight inches for overlap.

    INSTALLATION

    Surface preparations: Inspect the outside of the joint. Brush surface as needed to ensure it is free of debris. If installing on horizontal pipe, dig a bell hole for complete access to the joint.

    The coupler shall be placed around the pipe with the mastic side to the pipe wall and spanning the joint, while centered on the joint gap to be sealed. The protective film shall be removed and the coupler applied with the overlap at the top of the pipe. The tensioning straps shall be aligned between the pipe corrugations and tightened. The closing flap protective film shall be removed and the closing flap shall cover the exposed straps and the work area.

    Also Available:

    CAUTION: *All statements and technical information are based on tests and/or data which MarMac Manufacturing deems reliable, however, MarMac does not warrant or guarantee the accuracy or completeness of such information. Please read further manufacturer liability and warranty information.