6” saddles fit 8” pipe and larger

• 6" Inlet Coupling 6.60"
• Includes special “slip-lock” clamps of 300 series stainless steel that make for fast and simple installations on any type of pipe from 6” to 15”.
• 5/16" Nut
• Tighten to 60 lbs. torque
• Drainage applications ONLY

6” saddles fit 8” pipe and larger

• 6" Inlet Coupling 6.60"
• Includes special “slip-lock” clamps of 300 series stainless steel that make for fast and simple installations on any type of pipe from 6” to 15”.
• 5/16" Nut
• Tighten to 60 lbs. torque
• Drainage applications ONLY

Fernco Hole Saw for QwikSeal

• Economical, lighter and easier to handle
• General purpose tempered steel hole saw used for coring all types of plastic pipe materials
• Core through all thick walled plastic pipe including corrugated
• DO NOT use with steel, concrete or clay

Fernco Chemical Couplings provide a flexible and watertight connection on drainage systems that require a high chemical resistance to a wide range of chemicals.  Manufactured to meet specific site requirements, Fernco Chemical Couplings withstand the widest possible range of chemicals, due to the shear band and clamping bands encasing a high-performance elastomeric sleeve with a chemically resistant one-piece Fluoropolymer (FEP) liner and PTFE seals.

FEATURES

• Pipe Type: PL: Plastic / CI: Cast Iron / DU: Duriron / DI: Ductile Iron / GL: Glass
• Pipe Size: 8"
• Min./Max pipe OD:  8.35" - 9.21"
• Transitions dissimilar chemical piping and sizes
• Chemical resistant drain system, connects chemical waste piping to chemical waste tanks
• One piece Fluoropolymer liner
• Suitable for above and below ground use
• Max temp: 212°F (consistent), 266° F (intermittent)
• Minimum temperature -50°F 
• 4.3 PSI maximum test pressure

APPLICATIONS

• Connects chemically resistant DWV pipe and  fittings
• Connects drain pipe for: chemistry labs, research  labs, beverage plants, commercial kitchens,  printing, as well as medical, pharmaceutical, pulp, film and chemical facilities
• Custom sizes available upon request

INSTALLATION INSTRUCTIONS

1. Champfer and deburr both pipe ends.
2. Mark the pipes adjacent to the coupling bands.
3. Apply Ten (10) layers of PTFE tape directly over the lines on the pipe.
4. Center the FEP liner over the pipe ends and PTFE tape. 
5. Use a heat gun to shrink the FEP liner to the pipe.
6. Center the coupling and tighten the bands. 
7. Ensure all bands are tightened to 60 inch pound.
8. Test for leaks.

Strong. Flexible. Steel Reinforced Universal Coupling. - Connects two pipes having an O.D. range of: 8.40"-10.15"

One coupling per nominal pipe size connects:

• Clay
• Concrete
• Ductile Iron
• Orangeburg
• Asbestos Cement
• Duriron
• Cast Iron
• Steel
• Plastic

*See chart for specific connections  Add Spec Sheet Link

Benefits

• One universal coupling per nominal size connects most pipe materials
• Heavy duty, multi-dimensional, non-shear sewer & drain coupling
• Stabilizes the connection against shear forces
• Complies with the material and performance requirements of ASTM C1173
• Heavy duty corrosion resistant high torque 316 series stainless steel clamps
• Stainless Steel Ribbed Construction
• Available Sizes: 4", 5", 6", 8", 10" & 12"

Fernco Hole Saw for QwikSeal

• Economical, lighter and easier to handle
• General purpose tempered steel hole saw used for coring all types of plastic pipe materials
• Core through all thick walled plastic pipe including corrugated
• DO NOT use with steel, concrete or clay

Helps eliminate leaks around pipes entering manhole walls.

• Flexible gasket allows pipe to move without breaking grout
• A = Inside dimension 9.88"
• B = Outside dimension 11.12"
• C = Thickness 1.63"

Helps eliminate leaks around pipes entering manhole walls.

• Flexible gasket allows pipe to move without breaking grout
• A = Inside dimension 11.84"
• B = Outside dimension 13.12"
• C = Thickness 1.63"

Helps eliminate leaks around pipes entering manhole walls.

• Flexible gasket allows pipe to move without breaking grout
• A = Inside dimension 4.20"
• B = Outside dimension 5.40"
• C = Thickness 1.50"

Helps eliminate leaks around pipes entering manhole walls.

• Flexible gasket allows pipe to move without breaking grout
• A = Inside dimension 6.05"
• B = Outside dimension 8.38"
• C = Thickness 1.63"

Helps eliminate leaks around pipes entering manhole walls.

• Flexible gasket allows pipe to move without breaking grout
• A = Inside dimension 7.95"
• B = Outside dimension 10.35"
• C = Thickness 1.63"

Suitable for above or below ground use as an permanent solution to cap pipe ends, test pipes and cleanouts. Fits 1.25" PL, 1.25" ST, 1.5" Copper, 1.5" SS

• Cap inside diameter 1.68"
• 1.37" - 1.87"
• 5/16" Nut
• Tighten to 60 lbs. torque
• Drainage applications ONLY