Use the best adjustable wrenches in new ways: a plastic dip coating gives ergonomic advantages of greater comfort, higher torque, and less fatigue. The plastic grip is also stickier than the steel handle, which combines with the larger diameter to make these wrenches easier to grip while working. Parallel jaw surfaces ensure good grip of nut. 22° 30’ angle allows for closest quarter work on hex nuts.

• To increase ergonomics, Reed comfort grips are thicker and harder than most.
• Same precision as Reed's adjustable wrenches with an added grip for more secure handhold.
• Capacity: 1 5/16" O.D.
• Length: 12"

Note: These are comfort grips only. These grips are not made for electrical insulation.

Use the best adjustable wrenches in new ways: a plastic dip coating gives ergonomic advantages of greater comfort, higher torque, and less fatigue. The plastic grip is also stickier than the steel handle, which combines with the larger diameter to make these wrenches easier to grip while working. Parallel jaw surfaces ensure good grip of nut. 22° 30’ angle allows for closest quarter work on hex nuts.

• To increase ergonomics, Reed comfort grips are thicker and harder than most.
• Same precision as Reed's adjustable wrenches with an added grip for more secure handhold.
• Capacity: 3/4" O.D.
• Length: 6"

Note: These are comfort grips only. These grips are not made for electrical insulation.

Use the best adjustable wrenches in new ways: a plastic dip coating gives ergonomic advantages of greater comfort, higher torque, and less fatigue. The plastic grip is also stickier than the steel handle, which combines with the larger diameter to make these wrenches easier to grip while working. Parallel jaw surfaces ensure good grip of nut. 22° 30’ angle allows for closest quarter work on hex nuts.

• To increase ergonomics, Reed comfort grips are thicker and harder than most.
• Same precision as Reed's adjustable wrenches with an added grip for more secure handhold.
• Capacity: 7/8" O.D.
• Length: 8"

Note: These are comfort grips only. These grips are not made for electrical insulation.

For hard-to-reach deep well bolts, Reed offers Extended Sockets that are made of tool steel and are impact grade. Use Extended Sockets to tighten hex nuts on repair clamps, mechanical joint fittings, and saddles. Drive them with a 1/2” square drive impact wrench or hand tighten. Finish on sockets provides corrosion-resistance.

• All 5 Reed Extended Sockets in a portable, heavy-duty case.
• Perfect for hard-to-reach deep well bolts.
• Extended length (6” and 6 ½”) impact grade sockets.
• Drive them with a 1/2” square drive impact wrench or hand tighten.
• Sockets sizes: 3/4", 7/8", 1 1/16", 1 1/8" and 1 1/4"

For hard-to-reach deep well bolts, Reed offers Extended Sockets that are made of tool steel and are impact grade. Use Extended Sockets to tighten hex nuts on repair clamps, mechanical joint fittings, and saddles. Drive them with a 1/2” square drive impact wrench or hand tighten. Finish on sockets provides corrosion-resistance.

• All 6 Reed Extended Sockets in a portable, heavy-duty case.
• Perfect for hard-to-reach deep well bolts.
• Extended length (6” and 6 ½”) impact grade sockets.
• Drive them with a 1/2” square drive impact wrench or hand tighten.
• Sockets sizes: 3/4", 7/8", 15/16", 1 1/16", 1 1/8" and 1 1/4"

Pilot drills are used with DM3MECH machines only as a guide for the hole saws.

• Length: 4.375"

Suitable for pentagon and square hydrant nuts.

• Forged Steel
• Fits pentagon nuts up to 1 3/4" O.D.
• Fits square nuts up to 1 1/4" O.D.
• Wrench has spanners for either pin or lug style hose couplings.
• Zinc-chromate plated for corrosion-resistance.
• Length:  20"

Suitable for pentagon and square hydrant nuts.

• Capacity Pentagon: Fits pentagon nuts up to 1 3/4" O.D.
• Capacity Square: Fits square nuts up to 1 1/4" O.D.
• Overall Length:  18"
• Handle Length:  13"

Dual Socket Ratchet Wrenches fit the most popular water works fasteners for mechanical joints, flange bolts, repair clamps, service saddles and sleeves. Each wrench also offers a handy switch on the head for safe action reversal. Ratchet wrenches are faster to use than pipe wrenches or adjustable wrenches.

• Combines two popular socket sizes into one tool.
• Rugged construction of handle and ratchet mechanism.
• Sockets sizes: 1 1/8" & 15/16".
• Reed’s Thru-Bolt sockets allow the bolt pass completely through the socket and arm head so nuts can be worked on any threaded length.
• Thru-bolt sockets replace the need for separate regular and deep sockets.
• Applications: Flange bolts, friction clamps, hydrant break flange and some bonnet bolts

Dual Socket Ratchet Wrenches fit the most popular water works fasteners for mechanical joints, flange bolts, repair clamps, service saddles and sleeves. Each wrench also offers a handy switch on the head for safe action reversal. Ratchet wrenches are faster to use than pipe wrenches or adjustable wrenches.

• Combines two popular socket sizes into one tool.
• Rugged construction of handle and ratchet mechanism.
• Sockets sizes: 1 1/8" & 1 1/16".
• Reed’s Thru-Bolt sockets allow the bolt pass completely through the socket and arm head so nuts can be worked on any threaded length.
• Thru-bolt sockets replace the need for separate regular and deep sockets.
• Applications: Gas and water industry couplings, repair clamps, service saddles, flange bolts.

Dual Socket Ratchet Wrenches fit the most popular water works fasteners for mechanical joints, flange bolts, repair clamps, service saddles and sleeves. Each wrench also offers a handy switch on the head for safe action reversal. Ratchet wrenches are faster to use than pipe wrenches or adjustable wrenches.

• Combines two popular socket sizes into one tool.
• Rugged construction of handle and ratchet mechanism.
• Sockets sizes: 1 1/4" & 1 1/16".
• Reed’s Thru-Bolt sockets allow the bolt pass completely through the socket and arm head so nuts can be worked on any threaded length.
• Thru-bolt sockets replace the need for separate regular and deep sockets.
• Applications: Mechanical joints and restraints, repair clamps, service saddles.

REED’s L2N1ADJ lets workers access nuts in tight quarters. The two socket sizes (1-1/4" x 1-1/16") feature a 12-point design which helps the sockets grip and hold for pipeline and construction work.

A unique feature of the wrench head is its ability to adjust position. Loosen the large wing nut to swing the socket head from side to side. Flipping the socket head, by disassembling the wing nut and bolt, makes it possible to use either socket opening without interference.

The 36-teeth pattern means there are 10 degrees between teeth which is beneficial for work in tight spaces and limited handle swing. The stamped steel handle is 17” long and has an ergonomic design. The wrench weighs just 2.3 lbs/ 1.1 kg making it comfortable to carry and use.

Extra attention to construction is found in the strong, cast steel sockets which are built for accuracy. The design of the ratchet engagement yields smooth operation and quick reversal movements. A robust, double pawl secures the tool in forward or reverse. Torque rating is 200 foot pounds. The L2N1ADJ is made in the USA.Carry one wrench for all your jobs.

• Sockets sizes: 1 1/4" and 11/16"
• Application: Mechanical joints and restraints, repair clamps, service saddles
• Reversible, adjustable head with easy-to-use wing nut for positioning.
• Two socket sizes back-to-back give double use to the wrench.
• Head pivots and locks in 30 degree intervals.
• Adjustable head allows easy access to MJ bolts on the bottom of the pipe.