Suitable for pentagon and square hydrant nuts.

• Capacity Pentagon: Fits pentagon nuts up to 1 3/4" O.D.
• Capacity Square: Fits square nuts up to 1 1/4" O.D.
• Overall Length:  18"
• Handle Length:  13"

Reed Internal Pipe Cutters cut pipe from the inside (i.e. drain pipes or sprinkler drops, etc).

• IC1A comes with an abrasive blade for areas where the blade may come in contact with concrete or other hard surfaces which would destroy a saw-tooth blade.
• Conveniently cut from the inside using a standard 3/8” drill. (Drill not included.)
• Used to cut off pipes below floor level or in the ceiling in new construction, around pools, and for replacement of closet flanges.
• During use, flats on the larger cutters keep the cutter from slipping in the jaws of the drill while a lock washer on the smaller cutters keeps the blades from slipping.
• Shaft: 4"
• Blade Type: Abrasive
• Blade Diameter: 1.53"
• Blade Cutting Depth 1/2"

Reed Internal Pipe Cutters cut pipe from the inside (i.e. drain pipes or sprinkler drops, etc).

• Heat-treated steel, saw-toothed blade make for fast cutting.
• During use, flats on the larger cutters keep the cutter from slipping in the jaws of the drill while a lock washer on the smaller cutters keeps the blades from slipping.
• All saw-toothed internal pipe cutter models cut plastic pipe aggressively and can cut wood for sink lugs.
• Conveniently cut from the inside using a standard 3/8” drill. (Drill not included.)
• Shaft: 4"
• Blade Type: Saw Tooth
• Blade Diameter: 1.26"
• Blade Cutting Depth .38"

Reed Internal Pipe Cutters cut pipe from the inside (i.e. drain pipes or sprinkler drops, etc).

• Heat-treated steel, saw-toothed blade make for fast cutting.
• During use, flats on the larger cutters keep the cutter from slipping in the jaws of the drill while a lock washer on the smaller cutters keeps the blades from slipping.
• All saw-toothed internal pipe cutter models cut plastic pipe aggressively and can cut wood for sink lugs.
• Conveniently cut from the inside using a standard 3/8” drill. (Drill not included.)
• Shaft: 7"
• Blade Type: Saw Tooth
• Blade Diameter: 1.26"
• Blade Cutting Depth .38"
• IC1SL features an adjustable guide that doubles as a depth gauge.

Reed Internal Pipe Cutters cut pipe from the inside (i.e. drain pipes or sprinkler drops, etc).

• Heat-treated steel, saw-toothed blade make for fast cutting.
• During use, flats on the larger cutters keep the cutter from slipping in the jaws of the drill while a lock washer on the smaller cutters keeps the blades from slipping.
• All saw-toothed internal pipe cutter models cut plastic pipe aggressively and can cut wood for sink lugs.
• Conveniently cut from the inside using a standard 3/8” drill. (Drill not included.)
• Shaft: 6"
• Blade Type: Saw Tooth
• Blade Diameter: .75"
• Blade Cutting Depth .13"
• IC3/4SL features an adjustable guide that doubles as a depth gauge.

Dual Socket Ratchet Wrenches fit the most popular water works fasteners for mechanical joints, flange bolts, repair clamps, service saddles and sleeves. Each wrench also offers a handy switch on the head for safe action reversal. Ratchet wrenches are faster to use than pipe wrenches or adjustable wrenches.

• Combines two popular socket sizes into one tool.
• Rugged construction of handle and ratchet mechanism.
• Sockets sizes: 1 1/8" & 15/16".
• Reed’s Thru-Bolt sockets allow the bolt pass completely through the socket and arm head so nuts can be worked on any threaded length.
• Thru-bolt sockets replace the need for separate regular and deep sockets.
• Applications: Flange bolts, friction clamps, hydrant break flange and some bonnet bolts

Dual Socket Ratchet Wrenches fit the most popular water works fasteners for mechanical joints, flange bolts, repair clamps, service saddles and sleeves. Each wrench also offers a handy switch on the head for safe action reversal. Ratchet wrenches are faster to use than pipe wrenches or adjustable wrenches.

• Combines two popular socket sizes into one tool.
• Rugged construction of handle and ratchet mechanism.
• Sockets sizes: 1 1/8" & 1 1/16".
• Reed’s Thru-Bolt sockets allow the bolt pass completely through the socket and arm head so nuts can be worked on any threaded length.
• Thru-bolt sockets replace the need for separate regular and deep sockets.
• Applications: Gas and water industry couplings, repair clamps, service saddles, flange bolts.

Dual Socket Ratchet Wrenches fit the most popular water works fasteners for mechanical joints, flange bolts, repair clamps, service saddles and sleeves. Each wrench also offers a handy switch on the head for safe action reversal. Ratchet wrenches are faster to use than pipe wrenches or adjustable wrenches.

• Combines two popular socket sizes into one tool.
• Rugged construction of handle and ratchet mechanism.
• Sockets sizes: 1 1/4" & 1 1/16".
• Reed’s Thru-Bolt sockets allow the bolt pass completely through the socket and arm head so nuts can be worked on any threaded length.
• Thru-bolt sockets replace the need for separate regular and deep sockets.
• Applications: Mechanical joints and restraints, repair clamps, service saddles.

REED’s L2N1ADJ lets workers access nuts in tight quarters. The two socket sizes (1-1/4" x 1-1/16") feature a 12-point design which helps the sockets grip and hold for pipeline and construction work.

A unique feature of the wrench head is its ability to adjust position. Loosen the large wing nut to swing the socket head from side to side. Flipping the socket head, by disassembling the wing nut and bolt, makes it possible to use either socket opening without interference.

The 36-teeth pattern means there are 10 degrees between teeth which is beneficial for work in tight spaces and limited handle swing. The stamped steel handle is 17” long and has an ergonomic design. The wrench weighs just 2.3 lbs/ 1.1 kg making it comfortable to carry and use.

Extra attention to construction is found in the strong, cast steel sockets which are built for accuracy. The design of the ratchet engagement yields smooth operation and quick reversal movements. A robust, double pawl secures the tool in forward or reverse. Torque rating is 200 foot pounds. The L2N1ADJ is made in the USA.Carry one wrench for all your jobs.

• Sockets sizes: 1 1/4" and 11/16"
• Application: Mechanical joints and restraints, repair clamps, service saddles
• Reversible, adjustable head with easy-to-use wing nut for positioning.
• Two socket sizes back-to-back give double use to the wrench.
• Head pivots and locks in 30 degree intervals.
• Adjustable head allows easy access to MJ bolts on the bottom of the pipe.

Reed’s L4N1 Thru-Bolt™ ratchet wrench features four sockets on one wrench in a popular dog bone configuration. Use just one tool to work on mechanical joints and restraints, repair clamps, service saddles, gas/water couplings, flange bolts, friction clamps, hydrant break flanges and some bonnet bolts.

• Carry one wrench for all your jobs.
• Sockets sizes: 1 1/4", 1 1/8", 1 1/16" and 15/16".
• Sockets are designed to stay on the handle, meaning no loose sockets.
• L4N1 offers rugged construction of its smooth grip handle with a forward/reverse lever.
• Reed’s Thru-Bolt sockets allow the bolt pass completely through the socket and arm head so nuts can be worked on any threaded length.
• Thru-bolt sockets replace the need for separate regular and deep sockets.
• The L4N1 wrench is made in USA.

Applications

• Mechanical joints and restraints, repair clamps, service saddles
• Gas and water industry couplings, repair clamps, service saddles, flange bolts
• Flange bolts, friction clamps, hydrant break flange and some bonnet bolts.

Reed’s L4N1 Thru-Bolt™ ratchet wrench features four sockets on one wrench in a popular dog bone configuration. Use just one tool to work on mechanical joints and restraints, repair clamps, service saddles, gas/water couplings, flange bolts, friction clamps, hydrant break flanges and some bonnet bolts.

• Sealed ratchets provide best performance and extra protection for jobsite conditions.
• Length and shape of handle yield maximum leverage.
• Carry one wrench for all jobs, with four sockets included.
• Sockets sizes: 1 1/4", 1 1/8", 1 1/16" and 15/16".
• Rugged grip handle provides a secure hold.
• Convenient directional switch located below socket.
• Sockets stay on handle – no loose sockets.

Applications

• Mechanical joints and restraints, repair clamps, service saddles
• Gas and water industry couplings, repair clamps, service saddles, flange bolts
• Flange bolts, friction clamps, hydrant break flange and some bonnet bolts.

Reed Thru-Bolt ratchet wrenches work faster than pipe wrenches or adjustable wrenches for tightening or loosening nuts on long, threaded bolts of service saddles, repair clamps, flanges, mechanical couplings, etc.

• Sets include a variety of standard hex sockets, one handle and a metal toolbox.
• Handle: L500
• Sockets sizes: 7/8", 15/16", 1 1/8", 1 1/4" and corp.