Provides a seal when installing pipe into risers, basins, etc.

• Ease of Installation
• Weather and Corrosion Resistant
• No Bolts or Gaskets Required
• Requires No Sealants
• Durable PVC Composition
• Material: PVC 70 Durometer
• Available in 3/8" through 6" sizes

 INSTALLATION INSTRUCTIONS

1. Select proper hole saw from information below and cut hole at desired location in part. 
2. Insert Adapt-A-Flex into the hole, making sure that it is flush against part. 
3. Slightly bevel one end of inlet pipe, making it easier to push through Adapt-A-Flex. 
4. Apply soapy water to Adapt-A-Flex at inlet pipe insertion point
5. Apply soapy water on beveled end of inlet pipe.
6. Push inlet pipe through Adapt-A-Flex

Sizing info for 6" #AKP10120  AAF-600-S35

Hole Saw Size:  7"   

    A = 6.275

    B = .512

    C = 5.50

    D = 7.063

Provides a seal when installing pipe into risers, basins, etc.

AK Industries 300 gallon Septic / Pump tank.

• Maximum bury depth is 24Ó to top of tank
• Suitable for light lawn traffic, no vehicles
• Recommended minimum fluid level for 300 gallon pump tank is 6Ó of fluid
• Diameter: 55.75"
• Height: 51.5"

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

Infiltrator’s 24” Adapter Flange provides a watertight connection when using EZsnap, EZset or TW-Risers and Lid Systems on a concrete septic tank with up to a 24” manhole openings.

The EZ-Snap Pipe Adapter Ring allows the use of 24" HDPE or Ultra-Rib pipe as a riser on Infiltrator Septic Tanks.

The 24" riser fiberglass-reinforced Safety Star system from Infiltrator is a strong secondary level of protection if a primary riser lid is unknowingly damaged or removed. The Safety Star system prevents unintended entry into the tank.

Benefits:

• Sits inside the riser stack at any desired level
• Strong glass-reinforced polypropylene construction
• Fastened in place with stainless steel screws
• Structural design withstands a dead load up to 300 lbs
• Meets regulatory requirements as a secondary septic tank lid

Specifications:

Fits in the uppermost riser stack of:

• EZsnap 24" x 6" risers
• EZsnap 24" x 12" risers

The Infiltrator Buoyancy Control Strap Kit is designed to work with Infiltrator IM- and CM-Series.  Please review the Tank Buoyancy Control Guidance document under the specifications tab. 

The buoyancy control strap kits are specifically designed to use with the Infiltrator line of tanks to ensure reliable, fast installation of tanks where buoyancy control is necessary. 

• The kit contains a set of two, four-strap kits including: two five-foot-long straps with sewn, looped ends and a 14-ft-long strap with a hooked end to be inserted into a ratchet strap with hooked end.   
• The heavy weight polyester strapping and stainless steel hardware found within our new buoyancy control strap kits will make for long lasting installations.

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

Suitable for use as a pump tank, septic tank or rainwater tank in shallow, multiple, and serial tank configurations.

The Infiltrator CM-1060 is a lightweight, strong and durable septic tank. This watertight tank design is offered with Infiltrator’s line of custom-fit risers and heavy-duty lids. Infiltrator compression molded tanks provide a revolutionary improvement in thermoplastic septic tank design, offering exceptional long-term strength and watertightness.

Do not install the tank in vehicular traffic areas. The tank is designed for non-traffic applications.

Benefits:

• Strong compression molded polypropylene construction
• Lightweight plastic construction and inboard lifting lugs allow for easy delivery and handling
• Integral heavy-duty green lids that interconnect with EZsnap risers and pipe riser solutions
• Structurally reinforced access ports eliminate distortion during installation and pump-outs
• Reinforced structural ribbing and fiberglass bulkheads offer additional strength
• Can be installed with 6” to 48” (152 to 1,219 mm) of cover
• Can be pumped dry during pump-outs
• Suitable for use as a septic tank, pump tank, or rainwater (non-potable) tank
• No special water filling requirements are necessary
• The tank may be backfilled with suitable native soil. See installation instructions for guidance.

Specifications:

Size
61.7"W x 134"L x 54.5"H
(1567 mm x 3409 mm x 1384 mm)

Two Access Ports
Each 24" (610 mm)

Weight
331 lbs (151 kg)

Total Capacity
1309 gal (4956 L)

Working Capacity
1111 gal (4207 L)

Burial Depth
Minimum 6" (152 mm)
Maximum 48" (1219 mm)

The EZ-Snap Lid will accommodate CM & IM Tanks and both the narrow and the wide end of the EZ-Snap Risers.

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

Suitable for use as a pump tank, septic tank or rainwater tank in shallow, multiple, and serial tank configurations.

The Infiltrator IM-1250 is a lightweight strong and durable septic tank. This watertight tank design is offered with Infiltrator’s line of custom-fit risers and heavy-duty lids. Infiltrator injection molded tanks provide a revolutionary improvement in plastic septic tank design, offering long-term exceptional strength and watertightness.

Do not install the tank in vehicular traffic areas. The tank is designed for non-traffic applications.

Benefits:

• Strong injection molded polypropylene construction
• Lightweight plastic construction and inboard lifting lugs allow for easy delivery and handling
• Structurally reinforced access ports eliminate distortion during installation and pump-outs
• Reinforced structural ribbing and fiberglass bulkheads offers additional strength
• Can be installed with 6" to 48" of cover
• Can be pumped dry during pump-outs
• Suitable for use as a septic tank, pump tank, or rainwater (non-potable) tank
• No special installation, backfill or water filling procedures are required
• No special water filling requirements are necessary
• The tank may be backfilled with suitable native soil. See installation instructions for guidance.

Specifications:

Size
61.7"W x 152.3"L x 54.6"H
(1567 mm x 3868 mm x 1387 mm)

Two Access Ports
24" (610 mm)

Weight
405 lbs (184 kg)

Total Capacity
1480 gal (5602 L)

Working Capacity
1278 gal (4839 L)

Burial Depth
Minimum 6" (152 mm)
Maximum 48" (1219 mm)

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

Suitable for use as a pump tank, septic tank or rainwater tank in shallow, multiple, and serial tank configurations.

The Infiltrator IM-1530 is a lightweight strong and durable septic tank. This watertight tank design is offered with Infiltrator’s line of custom-fit risers and heavy-duty lids. Infiltrator injection molded tanks provide a revolutionary improvement in plastic septic tank design, offering long-term exceptional strength and watertightness.

Do not install the tank in vehicular traffic areas. The tank is designed for non-traffic applications.

Benefits:

• Strong injection molded polypropylene construction
• Lightweight plastic construction and inboard lifting lugs allow for easy delivery and handling
• Structurally reinforced access ports eliminate distortion during installation and pump-outs
• Reinforced structural ribbing and fiberglass bulkheads offers additional strength
• Can be installed with 6" to 48" of cover
• Can be pumped dry during pump-outs
• Suitable for use as a septic tank, pump tank, or rainwater (non-potable) tank
• No special installation, backfill or water filling procedures are required
• No special water filling requirements are necessary
• The tank may be backfilled with suitable native soil. See installation instructions for guidance.

Specifications:

Size
62"W x 176"L x 55"H
(1567 mm x 4460 mm x 1384 mm)

Access Port
24" (610 mm)

Weight
501 lbs (228 kg)

Total Capacity
1787 gal (6765 L)

Working Capacity
1537 gal (5818 L)

Burial Depth
Minimum 6" (152 mm)
Maximum 48" (1219 mm)

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

The Infiltrator IM-300 is a lightweight, strong and durable pump tank. This watertight tank design is offered with Infiltrator’s line of custom-fit risers and heavy-duty lids. Infiltrator injection molded tanks provide a revolutionary improvement in plastic tank design, offering exceptional long-term strength and watertightness.

Do not install the tank in vehicular traffic areas. The tank is designed for non-traffic applications.

Benefits:

• Strong injection molded polypropylene construction
• Lightweight plastic construction and inboard lifting lugs allow for easy delivery and handling
• Structurally reinforced access ports eliminate distortion during installation and pump-outs
• Reinforced structural ribbing and fiberglass bulkheads offers additional strength
• Can be installed with 6" to 48" of cover
• Can be pumped dry during pump-outs
• Suitable for use as a septic tank, pump tank, or rainwater (non-potable) tank
• No special installation, backfill or water filling procedures are required
• No special water filling requirements are necessary
• The tank may be backfilled with suitable native soil. See installation instructions for guidance.

Specifications:

Size
50.9"W x 50.9"L x 50.5"H
(1293 mm x 1293 mm x 1283 mm)

Two Access Ports
24" (610 mm)

Weight
110 lbs (50 kg)

Total Capacity
322 gal (1219 L)

Working Capacity
278 gal (1052 L)

Burial Depth
Minimum 6" (152 mm)
Maximum 52" (1321 mm)