Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

Outdoor High Liquid Level Alarm

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

Indoor Alarm with Snap on Sensor

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

Alarm with puck/puddle sensor for floor level water sensing. 50' cord.

• Indoor rated
• 115V operation with 9-volt battery backup;
• 86 decibel horn 
• Red LED alarm ring 
• Green “power-on” light 
• Auxiliary contacts 
• Automatic alarm reset 
• Test / Silence buttons 
• 9-volt battery included

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

Liberty Pumps new ProSeries Access Riser is a convenient chamber for all your pump's electrical and piping connections-out of sight and below grade. The Access Riser simply slides over the sealed Pro370 or Pro380 system. The cover is retained by 4 stainless steel bolts and features a twist-lock design with provision for padlock to deter unwanted entry.

Optional Installation Kits

Liberty Pumps installation kits provide all the components for a professional installation inside the riser. Kit includes: JB-Series wiring box and hardware, check valve with a disconnect union feature, coupling and elbows (PVC piping not included). Kits available in 2" discharge and vent size only.

• IKIT2-115 2" piping installation kit, 115V
• IKIT2-230 2" piping installation kit, 230V
• ARCKIT115 Complete Kit - Riser, Cover and 2" installation accessories, 115V
• ARCKIT230 Complete Kit - Riser, Cover and 2" installation accessories, 230V

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

Duplex pump system detects oil and water allowing for diversion of oil to a separate tank via dedicated oil and water pumps. For use in elevator pits, vaults and other areas requiring the control of oil discharge from sump water.

Features

• Pumps available in 1/2 hp, 3/4 hp and 6/10 hp
• Flow rates to 95 GPM and heads  to 65' (depending on model)
• Single and three-phase pump  models available
• Complete system ships with control  panel, remote alarm, level sensor,  junction box with disconnects,  2 reducer couplings, 2 brass  check valves and pumps.  (Systems with oil holding  tank also available!)
• OilTector® control features advanced  touch screen display and programming
• Dry contact outputs for alarm conditions
• Preset level sensor for easy installation
• Advanced system monitors/verifies the amount of fluid pumped and that it was pumped to the correct location
• Controls are available with optional BACnet Gateway for integration with building  automation and control systems.   

Review Technical Data Sheets for more information.

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

The ELV-Series sump pumps are designed and approved for safe operation of pumping, alarming and monitoring of elevator sump pits, transformer vaults and other applications where oil and water must be detected. The OilTector® system will activate the pump to remove water from elevator pits in accordance with ASME A17.1, and will provide pumping of only water - even if an oil condition is detected. The OilTector® cycles the pump only in the water range. Oil and other harmful floating substances are not discharged into the environment. An alarm is activated in the event of a high water condition or high oil condition.

Features

• Complete packaged system
• 1/3, 1/2 or 3/4 hp Sump pump
• 1-1/2" Discharge control
• OilTector®
• Remote alarm
• 115 or 230V Models
• Easy clamp-mount installation, with plug-in ready wiring

Review Specification Sheets for more information.

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

The FL50-Series by Liberty Pumps is a mid-range effluent pump designed for STEP systems, mound systems, liquid waste transfer and higher head de-watering applications. Built of heavy cast iron with an epoxy powder coat finish and stainless steel fasteners, the FL50 will provide years of reliable performance.

• 1/2 hp.
• 1-1/2" or 2" Discharge
• 3/4" Solids Handling
• Single Phase 115 V
• 10' cord
• Wide-angle float switch with piggyback plug

Features

• Semi-open impeller permits  passage of solids without clogging
• Heavy-duty iron construction
• Stainless steel fasteners
• Stainless steel rotor shaft
• Permanently lubricated upper and  lower ball bearings
• Oil-filled hermetically sealed motor  with thermal overload protection
• Unitized carbon ceramic shaft seal
• Dual-sized discharge flange:  1-1/2" or 2"
• Quick-connect power cord in  10' standard length (25', 35' and 50'  optional lengths available on certain models)

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

The FL50-Series by Liberty Pumps is a mid-range effluent pump designed for STEP systems, mound systems, liquid waste transfer and higher head de-watering applications. Built of heavy cast iron with an epoxy powder coat finish and stainless steel fasteners, the FL50 will provide years of reliable performance.

• 1/2 hp.
• 1-1/2" or 2" Discharge
• 3/4" Solids Handling
• Single Phase 208-230V
• 10' cord
• Wide-angle float switch with piggyback plug

Features

• Semi-open impeller permits  passage of solids without clogging
• Heavy-duty iron construction
• Stainless steel fasteners
• Stainless steel rotor shaft
• Permanently lubricated upper and  lower ball bearings
• Oil-filled hermetically sealed motor  with thermal overload protection
• Unitized carbon ceramic shaft seal
• Dual-sized discharge flange:  1-1/2" or 2"
• Quick-connect power cord in  10' standard length (25', 35' and 50'  optional lengths available on certain models)

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

The FL60-series by Liberty Pumps is a mid-range effluent pump designed for STEP systems, mound systems, liquid waste transfer and higher head de-watering applications. Built of heavy cast iron with an epoxy powder coat finish and stainless steel fasteners, the FL60 will provide years of reliable performance.

• 6/10 hp.
• 1-1/2" or 2" Discharge
• 3/4" Solids Handling
• Single Phase 208-230 V
• 10' cord
• Wide-angle float switch with piggyback plug

Features

• Semi-open impeller permits passage of solids without clogging (FLH60 has an enclosed impeller)
• Heavy cast iron construction
• Stainless steel fasteners
• 416 stainless steel rotor shaft
• Permanently lubricated upper and lower ball bearings
• Oil-filled hermetically sealed motor with thermal overload protection
• Unitized carbon and ceramic shaft seal
• Dual-sized discharge flange:  1-1/2" or 2"
• Quick-disconnect power cord in 10' standard length (25', 35' and 50' optional lengths available on some models)

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

Fits Omnivore LSG-Series Grinder Pumps

• 90 Degree
• Provides vertical discharge for non-guide rail installations
• 1-1/4" female NPT outlet
• Powder coated for corrosion resistance
• Includes sealing grommet and stainless steel bolts
• Allows LSG-Series pumps to connect to some other guide rail designs

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

Grinder pump Anti-siphon Check Valve

• Heavy cast iron construction
• Integrated heavy weight nitrile ball check valve
• Anti-siphon features breaks suction to prevent unwanted tank siphonage
• 1-1/4" female NPT connection
• 125 PSI rated

Available for pick up at our Indiana locations Monday - Friday 7am - 4pm.
Call (317) 346-4110 or email dps-customercare@drainagesolutionsinc.com
Delivery only available within Indiana.

Fits Omnivore LSG-Series Grinder Pumps

• Heavy cast iron construction
• Single guide pipe design with auto align feature
• 1-1/4" guide pipe female NPT
• 1-1/4" discharge female NPT
• Powder coated for corrosion resistance
• Heavy nitrile sealing grommets
• Includes mating flange for LSG-Series pump and upper rail support bracket, stainless steel bolts and sealing grommet (Guide rail pipe not included)