• Utility Covers are designed to eliminate dangerous and unsightly sewer and access pipes.
• Utility Covers can be flush mount directly to the access pipe or ground pit .
• Available sizes 6"-24"
• Pedestrian Traffic ONLY

• Surface Inlets are designed for a flush finish for your convenience.
• Typical applications include garage drains, parking lots, or anywhere surface drainage is necessary.
• Castings are made to fit inside standard drainage tile.
• Available sizes 4"-24"
• Pedestrian Traffic ONLY

Solid Cover / Lid that fits multiple types of pipe. 

Features

• Manufactured from structurally foamed High Density Polyethylene (HDPE)
• UV Stabilized to protect from sun degradation
• Textured anti-skid surface
• Lids include bolt holes to allow for securing to pipe (use #10 1.5” long Phillips flat head stainless steel screws)
• Recommended for pedestrians traffic
• Made in USA

1. Maximum load based on weight uniformly applied across entire grate surface.  (6000 lbs.)

2. Due to wide manufacturing tolerances of Corrugated Pipe, this fit may not be perfect.

Fits

• 15" PVC SDR35 Pipe
• 15" HDPE Corrugated Pipe
• 15" C76 Concrete Pipe

Domed cover ideal for access cover

• Fits 15" Corrugated Doublewall Pipe
• Pedestrian traffic ONLY

• Flat Grates are designed to provide both a high volume water capacity and a flush finish.
• One-piece aluminum construction makes the Flat Grate light-weight and cost efficient.
• Castings are designed to fit inside standard drainage tile.
• Available sizes 4"-24"
• Pedestrian Traffic ONLY

• Low Cones are a one piece aluminum construction and are used where sufficient free opening is necessary for adequate and insured storm or field drainage.
• Castings are made to fit inside standard drainage tile inlets.
• Available sizes 4"-24"
• Pedestrian Traffic ONLY

• Utility Covers are designed to eliminate dangerous and unsightly sewer and access pipes.
• Utility Covers can be flush mount directly to the access pipe or ground pit .
• Available sizes 6"-24"
• Pedestrian Traffic ONLY

• Surface Inlets are designed for a flush finish for your convenience.
• Typical applications include garage drains, parking lots, or anywhere surface drainage is necessary.
• Castings are made to fit inside standard drainage tile.
• Available sizes 4"-24"
• Pedestrian Traffic ONLY

Domed cover ideal for access cover

• Fits 18" Corrugated Doublewall Pipe
• Pedestrian traffic ONLY

Ideal for access cover - Fits over 18" Corrugated Doublewall Pipe

Alternate Product in stock 18G

The SFRC18G, our septic tank riser cover, is constructed of injection molded polyethylene structural foam. Utilizing our Tech Tough^™ design technology, the SFRC18G can support up to 1,250 pounds. The cover comes with our replaceable water tight seal. Insulation is also an option for extreme climates. The SFRC18G comes with our non-slip Lawn Deco^™ decorative green finish.

Features and Benefits

• Adapts to all 18 in. PVC, single and double wall polyethylene riser pipes
• Natural green color - easily camouflaged by lawn and landscaping
• Strong and lightweight
• Replaceable water tight seal
• Customized logos available

Specifications:

Diameter: 21.375 in.
Bolt Circle: 18.75 in.
Material: Injection Molded Polyethylene Structural Foam
Application: Septic Systems
* Not rated for vehicular loads including but not limited to cars, forklifts, and lawn mowers.

Ideal for yard / area drains to collect surface water while minimizing the amount of debris entering the system.

The Raw Cast Iron option starts out grey in color then, once exposed to the elements, it will deepen over time until it reaches its final rich, dark brown patina. To skip this process, consider our Baked-On-Oil finished grates.

Kits includes: NDS Two Hole Catch Basin (1882),  Iron Age Cast Iron Interlaken Grate (IN18), NDS Plug (1206), two NDS Universal Outlets 8" (1888), two NDS Universal Outlets 6" (1266)  and two NDS Universal Outlets 3" & 4" (1243).

• Actual grate dimension 16.78" x 16.78" x 1"
• Due to casting inconsistencies dimensions are nominal
• Remove #1890 Reducer Rings to use #1888 Universal Outlet
• ADA Compliant
• #1816 Catch Basin Extension available

• Flat Grates are designed to provide both a high volume water capacity and a flush finish.
• One-piece aluminum construction makes the Flat Grate light-weight and cost efficient.
• Castings are designed to fit inside standard drainage tile.
• Available sizes 4"-24"
• Pedestrian Traffic ONLY