• Low Cones are a one piece aluminum construction and are used where sufficient free opening is necessary for adequate and insured storm or field drainage.
• Castings are made to fit inside standard drainage tile inlets.
• Available sizes 4"-24"
• Pedestrian Traffic ONLY

• Utility Covers are designed to eliminate dangerous and unsightly sewer and access pipes.
• Utility Covers can be flush mount directly to the access pipe or ground pit .
• Available sizes 6"-24"
• Pedestrian Traffic ONLY

• Surface Inlets are designed for a flush finish for your convenience.
• Typical applications include garage drains, parking lots, or anywhere surface drainage is necessary.
• Castings are made to fit inside standard drainage tile.
• Available sizes 4"-24"
• Pedestrian Traffic ONLY

Domed cover ideal for access cover

• Fits 24" Corrugated Doublewall Pipe
• Pedestrian traffic ONLY

Ideal for access cover - Fits over 24" Corrugated Doublewall Pipe

The SFRC24B, our septic tank riser cover, is constructed of injection molded polyethylene structural foam. Utilizing our Tech Tough^™ design technology, the SFRC24B can support up to 1,250 pounds. The cover comes with our replaceable water tight seal. Insulation is also an option for extreme climates. The SFRC24B comes with our non-slip black finish.

Features and Benefits

• Adapts to all 24 in. PVC, single and double wall polyethylene riser pipes
• Strong and lightweight
• Replaceable water tight seal
• Customized logos available

Specifications:

Diameter: 26.5 in.
Bolt Circle: 24.25 in.
Material: Injection Molded Polyethylene Structural Foam
Application: Septic Systems

* Not rated for vehicular loads including but not limited to cars, forklifts, and lawn mowers.

Ideal for access cover - Fits over 24" Corrugated Doublewall Pipe

Alternate Product in stock 24G

The SFRC24G, our septic tank riser cover, is constructed of injection molded polyethylene structural foam. Utilizing our Tech Tough^™ design technology, the SFRC24G can support up to 1,250 pounds. The cover comes with our replaceable water tight seal. Insulation is also an option for extreme climates. The SFRC24G comes with our non-slip Lawn Deco^™ decorative green finish.

Features and Benefits

• Adapts to all 24 in. PVC, single and double wall polyethylene riser pipes
• Natural green color - easily camouflaged by lawn and landscaping
• Strong and lightweight
• Replaceable water tight seal
• Customized logos available

Specifications:

Diameter: 26.5 in.
Bolt Circle: 24.25 in.
Material: Injection Molded Polyethylene Structural Foam
Application: Septic Systems
* Not rated for vehicular loads including but not limited to cars, forklifts, and lawn mowers.

Allows water to be diverted and released to water-safe areas away from structures, erosion-prone landscapes and poor drainage areas.

Permits water captured by grates, catch basins, channel drains, Flo-Well, downspouts and roof gutter systems to flow through the drainage pipe and away from structural foundations to safe or useful areas. For example, water can be routed from a low area next to a foundation to a water safe area such as a curbside drainage system.

Opened by the hydrostatic pressure of water flowing through the drain pipe. As flow diminishes the Emitter closes again. The special patented design allows the Emitter to open with a negligible amount of pressure. Since the Emitter is closed during dry weather, debris and rodents cannot enter the drain pipes.

Features

• OVERALL TOP WIDTH 5 15/16"
• Polyolefin Pop-Up Drainage Emitter with spring loaded center and UV inhibitor
• Spring automatically retracts
• PVC 90 degree elbow with drain hole or slot and HDPE Adapter #3PExDS
• 40 G.P.M.
• Fits 3" Corrugated Pipe
• Can be installed in vertical applications - ideal for discharging water from retaining walls and street curbs
• May be used with Flo-Well to relieve overflow

Individual emitters available NDS420

Allows water to be diverted and released to water-safe areas away from structures, erosion-prone landscapes and poor drainage areas.

Permits water captured by grates, catch basins, channel drains, Flo-Well, downspouts and roof gutter systems to flow through the drainage pipe and away from structural foundations to safe or useful areas. For example, water can be routed from a low area next to a foundation to a water safe area such as a curbside drainage system.

Opened by the hydrostatic pressure of water flowing through the drain pipe. As flow diminishes the Emitter closes again. The special patented design allows the Emitter to open with a negligible amount of pressure. Since the Emitter is closed during dry weather, debris and rodents cannot enter the drain pipes.

Features

• OVERALL TOP WIDTH 5 15/16"
• Polyolefin Pop-Up Drainage Emitter with spring loaded center and UV inhibitor
• Spring automatically retracts
• 40 G.P.M.
• Fits 3" and 4" Sewer and Drain Fittings
• Can be installed in vertical applications - ideal for discharging water from retaining walls and street curbs
• May be used with Flo-Well to relieve overflow

Also Available: Contractor Pack of 20 emitters NDS420_BX   

Allows water to be diverted and released to water-safe areas away from structures, erosion-prone landscapes and poor drainage areas.

Permits water captured by grates, catch basins, channel drains, Flo-Well, downspouts and roof gutter systems to flow through the drainage pipe and away from structural foundations to safe or useful areas. For example, water can be routed from a low area next to a foundation to a water safe area such as a curbside drainage system.

Opened by the hydrostatic pressure of water flowing through the drain pipe. As flow diminishes the Emitter closes again. The special patented design allows the Emitter to open with a negligible amount of pressure. Since the Emitter is closed during dry weather, debris and rodents cannot enter the drain pipes.

Features

• OVERALL TOP WIDTH 5 15/16"
• Polyolefin Pop-Up Drainage Emitter with spring loaded center and UV inhibitor
• Spring automatically retracts
• 40 G.P.M.
• Fits 3" and 4" Sewer and Drain Fittings
• Can be installed in vertical applications - ideal for discharging water from retaining walls and street curbs
• May be used with Flo-Well to relieve overflow

Individual emitters available NDS321

Allows water to be diverted and released to water-safe areas away from structures, erosion-prone landscapes and poor drainage areas.

Permits water captured by grates, catch basins, channel drains, Flo-Well, downspouts and roof gutter systems to flow through the drainage pipe and away from structural foundations to safe or useful areas. For example, water can be routed from a low area next to a foundation to a water safe area such as a curbside drainage system.

Opened by the hydrostatic pressure of water flowing through the drain pipe. As flow diminishes the Emitter closes again. The special patented design allows the Emitter to open with a negligible amount of pressure. Since the Emitter is closed during dry weather, debris and rodents cannot enter the drain pipes.

Features

• OVERALL TOP WIDTH 5 15/16"
• Polyolefin Pop-Up Drainage Emitter with spring loaded center and UV inhibitor
• Spring automatically retracts
• PVC 90 degree elbow with drain hole or slot
• 40 G.P.M.
• Fits 3" Sewer and Drain Pipe
• Can be installed in vertical applications - ideal for discharging water from retaining walls and street curbs
• May be used with Flo-Well to relieve overflow
• 321 - 322GB

Also Available: Contractor Pack of 25 emitters NDS321_BX 

Permits water captured by grates, catch basins, channel drains, Flo-Well, downspouts and roof gutter systems to flow through the drainage pipe and away from structural foundations to safe or useful areas. For example, water can be routed from a low area next to a foundation to a water safe area such as a curbside drainage system.

Opened by the hydrostatic pressure of water flowing through the drain pipe. As flow diminishes the Emitter closes again. The special patented design allows the Emitter to open with a negligible amount of pressure. Since the Emitter is closed during dry weather, debris and rodents cannot enter the drain pipes.

Features

• OVERALL TOP WIDTH 5 15/16"
• Polyolefin Pop-Up Drainage Emitter with spring loaded center and UV inhibitor
• Spring automatically retracts
• PVC 90 degree elbow with drain hole or slot
• 40 G.P.M.
• Fits 3" Sewer and Drain Pipe
• Can be installed in vertical applications - ideal for discharging water from retaining walls and street curbs
• May be used with Flo-Well to relieve overflow
• 321 - 322GB

Mitered Drain™ is perfect for use in hard to drain areas where lack of grade difference is a problem. Because of its sloped grate, water flows directly into the pipe eliminating the drop typical in conventional inlets allowing for better drainage in flat areas that need extra slope to achieve proper drainage.  

For use with culverts, under sidewalks, in planter areas, creeks and swales or any difficult-to-drain location.

• Light Duty retail / consumer model
• DIFFERENT DISCHARGE DESIGN THAN THE CONTRACTOR GRADE GRAY AND BLACK MODELS
• 3:1 Slope  
• HDPE grates have UV inhibitor
• Area of grate opening (9.85 sq. in.)
• Set screws are type 300 stainless steel
• Not recommended for traffic loads
• Made in USA